skip to footer block
HDL Mirka MA1055 5x5H Grip Faced Interface Pad P14498825HDL-MA1055 https://cdnimages.opentip.com/full/HDL/HDL-MA1055.jpg Mirka MA1055 5x5H Grip Faced Interface Pad Manufacturer Part Number: MA1055Use with hook & loop backup pads for sanding rouned surfaces and contoursProduces a softer resultPlaced between backup pad and abrasive disc More Information Weight 0.050000 Manufacturer Mirka Description Wildcard Grip faced pad Length 0 Size 5\" x 5H Type Sanding Pad 14498825 0.0580lbs 0.00 0.00 0.00
Mirka
12.3100 2025-08-30 Out of Stock
customer review - by , June 6, 2023
5/ 5stars
If you're going to use mesh sandpaper this is a must have or you'll burn through the sanders velcro grip. I am using on with both of my Festool sanders and have been surprised how long they have lasted.
customer review - by , May 5, 2023
5/ 5stars
My pad on my sander was worn out and would not hold the sandpaper very well. I bought these, and had to use spray adhesive to stick one to my existing pad. That was 6 weeks ago, and I am still using the old pad with this protector on it and it works GREAT! Extended the life of my old pad a bunch.
customer review - by , March 3, 2023
4/ 5stars
Holes overlap some with Rotex but not enough and leaves a lot of dust behind. The product is probably great for Mirka, but not for my use. I bought because the ones for Festool were back ordered and several weeks out
customer review - by , February 2, 2023
5/ 5stars
pad saver
customer review - by , December 12, 2022
5/ 5stars
yes I like
customer review - by , October 10, 2022
5/ 5stars
I use the Mirka sanding discs that look like a mesh screen. I learned the hard way on my 6 sander that these will prevent you from killing the hook and loop on the sander disc. I ordered a new disc and also ordered these for my 6 sanders. Small price for insurance against wearing another sanding pad out too quickly. Reccomend!
customer review - by , February 2, 2022
5/ 5stars
Cover it up.. your six inch pad.. cause we know it’s cheaper to replace these verse your 6 inch.. pad. Simply works. No worries about having to replace that pad anytime soon.
customer review - by , January 1, 2021
5/ 5stars
These were new to me, I read about them in some other review -- but they work well, and don't compromise the connection to the sander. Dust passes right through, at least with my Bosch. The pad will last much longer with this.
customer review - by , March 3, 2020
5/ 5stars
I wish I knew about these years ago.
customer review - by , February 2, 2020
5/ 5stars
I was having to buy a new pad for my Bosch 6 random orbit sander over twice per year and they're not cheap. I love Abranet discs because of their life and superior dust collection but the hooks on the Velcro protrude slightly through the mesh and get worn during sanding and eventually they're unable to hold the sanding disc. This protector goes between the pad and the abrasive and becomes a much less expensive sacrificial piece. I didn't even know this product existed until I was in my local Woodcraft store and it came up in conversation with the employee there. Now, when the hooks eventually wear, I'll just slap on a new protector and keep sanding. I wish I had known about these years ago.

Mirka MA1055 5x5H Grip Faced Interface Pad, Price/Each

stars Rating 5 | 10 reviews
Brand Mirka
Shop more from HDL

SKU: HDL-MA1055
Price: $12.31
Quantity:
Out of Stock
*  Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back in stock.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Price is for Each.

Manufacturer Part Number: MA1055

Use with hook & loop backup pads for sanding rouned surfaces and contours

  • Produces a softer result
  • Placed between backup pad and abrasive disc


warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Return Policy

We do not accept returns if the product has been tried to be installed.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
5 stars
9
4 stars
1
3 stars
0
2 stars
0
1 stars
0
By Boise Idaho
Date: June 22, 2023
If you're going to use mesh sandpaper this is a must have or you'll burn through the sanders velcro grip. I am using on with both of my Festool sanders and have been surprised how long they have lasted.
Rating: 5 stars [5 of 5 Stars!]
By Alan Brend
Date: May 04, 2023
My pad on my sander was worn out and would not hold the sandpaper very well. I bought these, and had to use spray adhesive to stick one to my existing pad. That was 6 weeks ago, and I am still using the old pad with this protector on it and it works GREAT! Extended the life of my old pad a bunch.
Rating: 5 stars [5 of 5 Stars!]
By Timothy Wolf
Date: March 31, 2023
Holes overlap some with Rotex but not enough and leaves a lot of dust behind. The product is probably great for Mirka, but not for my use. I bought because the ones for Festool were back ordered and several weeks out
Rating: 4 stars [4 of 5 Stars!]
By jeff davis
Date: February 20, 2023
pad saver
Rating: 5 stars [5 of 5 Stars!]
By Maciej C.
Date: December 29, 2022
yes I like
Rating: 5 stars [5 of 5 Stars!]
By Tim
Date: October 05, 2022
I use the Mirka sanding discs that look like a mesh screen. I learned the hard way on my 6 sander that these will prevent you from killing the hook and loop on the sander disc. I ordered a new disc and also ordered these for my 6 sanders. Small price for insurance against wearing another sanding pad out too quickly. Reccomend!
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 10 reviews
 1  2  [Next]