0 reviews
Be the first to review this item!
Product Description
Manufacturer Part Number: K-MOD103
The Wave is a versatile stand-alone, tube-driven analog spring-reverb-unit kit. It can be used in front of your guitar amp or as a line-level analog reverb effect for the recording studio. Two controls allow you to serve up a wide range of wetness from just a touch to over the top psychedelia. The Dwell control adjusts the input signal level driving the tank and the Reverb control adjusts the level of output reverberations from the tank. The Wave's all tube design utilizes four dual triode vacuum tubes - three 12AX7s and one 12AT7 - and comes with a MOD® three-spring reverb tank. MOD® reverb tanks are deemed the closest to the original reverb tanks from the '60s made today. The Wave's reverb function can be switched in and out pop-free via the front panel toggle or with a foot switch (purchased separately).
The Wave has standard ¼ inch in-and-out guitar jacks in the front for use with your guitar and amp, and standard RCA in-and-out jacks in the back panel for use in a recording environment. The Wave is equipped to be rack mounted using just under 3U of space and is approximately 11 inches deep front to back. Four large rubber feet allow the Wave to be safely placed on top of most contemporary guitar amplifier heads and combos for stage use, and it fits into a rack without having to remove the feet. The Wave comes with a pre-punched powder coated steel chassis, easy-to-follow instructions and all necessary parts.
The Wave is equipped to be rack mounted using just under 3U of space and is approximately 11 inches deep front to back. Four large rubber feet allow the Wave to be safely placed on top of most contemporary guitar amplifier heads and combos for stage use, and it fits into a rack without having to remove the feet. The Wave comes with a pre-punched powder coated steel chassis, easy-to-follow instructions and all necessary parts.
For use in countries with a 240VAC mains, P-T290WEX can be used in place of the included power transformer. The P-T290WEX cannot be substituted in the kit and will need to be purchased separately.
Measurements and Specs
Files
The Wave is a versatile stand-alone, tube-driven analog spring-reverb-unit kit. It can be used in front of your guitar amp or as a line-level analog reverb effect for the recording studio. Two controls allow you to serve up a wide range of wetness from just a touch to over the top psychedelia. The Dwell control adjusts the input signal level driving the tank and the Reverb control adjusts the level of output reverberations from the tank. The Wave's all tube design utilizes four dual triode vacuum tubes - three 12AX7s and one 12AT7 - and comes with a MOD® three-spring reverb tank. MOD® reverb tanks are deemed the closest to the original reverb tanks from the '60s made today. The Wave's reverb function can be switched in and out pop-free via the front panel toggle or with a foot switch (purchased separately).
The Wave has standard ¼ inch in-and-out guitar jacks in the front for use with your guitar and amp, and standard RCA in-and-out jacks in the back panel for use in a recording environment. The Wave is equipped to be rack mounted using just under 3U of space and is approximately 11 inches deep front to back. Four large rubber feet allow the Wave to be safely placed on top of most contemporary guitar amplifier heads and combos for stage use, and it fits into a rack without having to remove the feet. The Wave comes with a pre-punched powder coated steel chassis, easy-to-follow instructions and all necessary parts.
The Wave is equipped to be rack mounted using just under 3U of space and is approximately 11 inches deep front to back. Four large rubber feet allow the Wave to be safely placed on top of most contemporary guitar amplifier heads and combos for stage use, and it fits into a rack without having to remove the feet. The Wave comes with a pre-punched powder coated steel chassis, easy-to-follow instructions and all necessary parts.
For use in countries with a 240VAC mains, P-T290WEX can be used in place of the included power transformer. The P-T290WEX cannot be substituted in the kit and will need to be purchased separately.
Measurements and Specs
| Height | 5.25 in. | |
| Length | 19 in. | |
| Rack Units | 3U | |
| Width | 11 in. |
| Packaging Dimensions | 22 in. × 14 in. × 12 in. | |
| Weight (Packaging) | 16.4 lbs. |
Files
| Assembly Drawings | All Models |
| Instructions | All Models |
| Line Out Mod | All Models |
| Min Dwell Mod | All Models |
| Schematic | All Models |
| Troubleshooting Supplement | All Models |
| Parts List Drawings | All Models |
| Sound Sample | All Models |
| Sound Sample 2 | All Models |
| Sound Sample (Swells) | All Models |
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item