skip to footer block
PEX Parts Express Heat Shrink Insulated Waterproof Solder Butt Connectors 12 10 AWG Yellow 25 Pack P11128772PEX-095-921 https://cdnimages.opentip.com/full/PEX/PEX-095-921.jpg Parts Express Heat Shrink Insulated Waterproof Solder Butt Connectors 12 10 AWG Yellow 25 Pack These solder, adhesive heat shrink butt connectors are perfect for the person who doesn\'t like to solder or crimp when splicing wires together. Hot air from a heat gun melts the center solder ring into the two crossed bare wires and the outer tube shrinks around the insulated wire jacket resulting in a firm, water tight, long lasting connection.Key Features: No crimping required for convenience Adhesive lined heat shrink seals water out to prevent corrosion Transparent heat shrink sleeve enables inspection of the solder joint Color coded sleeve identifies industry standard wire gauge recommended Economical 25-pack Heat Shrink Insulated Waterproof Solder Butt Connectors (12-10 AWG) Yellow 25-PackSolder is recommended to give you the best connection between wires, and wire connectors, but isn\'t always possible or practical. Standard crimp butt splice connectors can pull loose if not done properly and don\'t seal out moisture which can lead to intermittent connections. The solder ring inside the NTE adhesive lined heatshrink tube enables you to get that perfect connection without using a soldering iron or gun, and no crimping is needed. Just stick your bare wires into each side of the butt connector so they cross underneath the solder ring (without having any bare wires outside the heat shrink tubing). Apply hot forced air, 266° F or higher, to the solder ring until the solder melts and the tubing shrinks tightly around the wire jacket. Inspect the bare wires in the center of the butt connector to ensure they are still crossed and the solder is melted to each wire. The adhesive melts with the solder and the tubing shrinks to give the splice a water tight seal. Heat guns (like our 370-364) reach the desired temperature quickly and work the best. A very hot hair dryer may also work. The 1.06\" (27 mm) long clear transparent sleeve with yellow rings identifies that these solder butt connectors are for 12 to 10 gauge wire.Product Details BrandParts Express Part Number095-921 UPC848864056845 Unit of MeasureEach Weight0.05 Product Specifications Connector TypeButt Splice Terminal / Stud SizeN/A Wire Gauge12-10 AWG 11128772 848864056845 0.0500lbs 0.00 0.00 0.00
Parts Express
9.72 2025-06-29 28 In Stock

Parts Express Heat Shrink Insulated Waterproof Solder Butt Connectors (12-10 AWG) Yellow 25-Pack

Shop more from PEX

UPC: 848864056845
SKU: PEX-095-921
Price:
$9.72Free shipping on orders over $65 on select PEX- items. Details
Buy in bulk & save 15% ($8.27 each)
Quantity:
28 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk
Price: $9.72 ea X 1 qty = $9.72
Quantity Price Save
1+ $9.72 0%
10+ $8.27 15%
This item is excluded from use of other offer, discount or coupon.

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with PEX-, and you can get free shipping for an order of over  $65.00  consisting of only PEX- series products.

Product Description

These solder, adhesive heat shrink butt connectors are perfect for the person who doesn't like to solder or crimp when splicing wires together. Hot air from a heat gun melts the center solder ring into the two crossed bare wires and the outer tube shrinks around the insulated wire jacket resulting in a firm, water tight, long lasting connection.

Key Features:
  • No crimping required for convenience
  • Adhesive lined heat shrink seals water out to prevent corrosion
  • Transparent heat shrink sleeve enables inspection of the solder joint
  • Color coded sleeve identifies industry standard wire gauge recommended
  • Economical 25-pack


Heat Shrink Insulated Waterproof Solder Butt Connectors (12-10 AWG) Yellow 25-Pack

Solder is recommended to give you the best connection between wires, and wire connectors, but isn't always possible or practical. Standard crimp butt splice connectors can pull loose if not done properly and don't seal out moisture which can lead to intermittent connections. The solder ring inside the NTE adhesive lined heatshrink tube enables you to get that perfect connection without using a soldering iron or gun, and no crimping is needed. Just stick your bare wires into each side of the butt connector so they cross underneath the solder ring (without having any bare wires outside the heat shrink tubing). Apply hot forced air, 266° F or higher, to the solder ring until the solder melts and the tubing shrinks tightly around the wire jacket. Inspect the bare wires in the center of the butt connector to ensure they are still crossed and the solder is melted to each wire. The adhesive melts with the solder and the tubing shrinks to give the splice a water tight seal. Heat guns (like our 370-364) reach the desired temperature quickly and work the best. A very hot hair dryer may also work. The 1.06" (27 mm) long clear transparent sleeve with yellow rings identifies that these solder butt connectors are for 12 to 10 gauge wire.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Customer Reviews
0 reviews
Be the first to review this item!