skip to footer block
PEX Parts Express Heat Shrink Insulated Waterproof Solder Butt Connectors 26 24 AWG White 25 Pack P11128781PEX-095-922 https://cdnimages.opentip.com/full/PEX/PEX-095-922.jpg Parts Express Heat Shrink Insulated Waterproof Solder Butt Connectors 26 24 AWG White 25 Pack These solder, adhesive heat shrink butt connectors are perfect for the person who doesn\'t like to solder or crimp when splicing wires together. Hot air from a heat gun melts the center solder ring into the two crossed bare wires and the outer tube shrinks around the insulated wire jacket resulting in a firm, water tight, long lasting connection.Key Features: No crimping required for convenienceAdhesive lined heat shrink seals water out to prevent corrosionTransparent heat shrink sleeve enables inspection of the solder jointColor coded sleeve identifies industry standard wire gauge recommendedEconomical 25-packOverview: Heat Shrink Insulated Waterproof Solder Butt Connectors (26-24 AWG) White 25-PackSolder is recommended to give you the best connection between wires, and wire connectors, but isn\'t always possible or practical. Standard crimp butt splice connectors can pull loose if not done properly and don\'t seal out moisture which can lead to intermittent connections. The solder ring inside the NTE adhesive lined heatshrink tube enables you to get that perfect connection without using a soldering iron or gun, and no crimping is needed. Just stick your bare wires into each side of the butt connector so they cross underneath the solder ring (without having any bare wires outside the heat shrink tubing). Apply hot forced air, 266° F or higher, to the solder ring until the solder melts and the tubing shrinks tightly around the wire jacket. Inspect the bare wires in the center of the butt connector to ensure they are still crossed and the solder is melted to each wire. The adhesive melts with the solder and the tubing shrinks to give the splice a water tight seal. Heat guns (like our 370-364) reach the desired temperature quickly and work the best. A very hot hair dryer may also work. The 1.06\" (27 mm) long clear transparent sleeve with white rings identifies that these solder butt connectors are for 26 to 24 gauge wire.Specification: Product DetailsBrandParts ExpressPart Number095-922UPC848864056852Unit of MeasureEachWeight0.05Product SpecificationsConnector TypeButt SpliceTerminal / Stud SizeN/AWire Gauge26-24 AWGManuals & Resources: Parts Express Standard Warranty 11128781 848864056852 0.0500lbs 0.00 0.00 0.00
Parts Express
8.38 2025-11-19 28 In Stock
  »  
  »  
  »  
  »  
  »  

Parts Express Heat Shrink Insulated Waterproof Solder Butt Connectors (26-24 AWG) White 25-Pack

Brand Parts Express
Shop more from PEX
UPC: 848864056852
SKU: PEX-095-922
Price:
$8.38Free shipping on orders over $129 on select PEX- items. Details
Buy in bulk & save 25% ($6.29 each)
Quantity:
28 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk
*  Price: $8.38 ea X 1 qty = $8.38
Quantity Price Save
1+ $8.38 0%
10+ $6.29 25%
* This item is excluded from use of other offer, discount or coupon.

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with PEX-, and you can get free shipping for an order of over  $129.00  consisting of only PEX- series products.

Product Description

These solder, adhesive heat shrink butt connectors are perfect for the person who doesn't like to solder or crimp when splicing wires together. Hot air from a heat gun melts the center solder ring into the two crossed bare wires and the outer tube shrinks around the insulated wire jacket resulting in a firm, water tight, long lasting connection.

Key Features:
  • No crimping required for convenience
  • Adhesive lined heat shrink seals water out to prevent corrosion
  • Transparent heat shrink sleeve enables inspection of the solder joint
  • Color coded sleeve identifies industry standard wire gauge recommended
  • Economical 25-pack


Overview:
Heat Shrink Insulated Waterproof Solder Butt Connectors (26-24 AWG) White 25-Pack

Solder is recommended to give you the best connection between wires, and wire connectors, but isn't always possible or practical. Standard crimp butt splice connectors can pull loose if not done properly and don't seal out moisture which can lead to intermittent connections. The solder ring inside the NTE adhesive lined heatshrink tube enables you to get that perfect connection without using a soldering iron or gun, and no crimping is needed. Just stick your bare wires into each side of the butt connector so they cross underneath the solder ring (without having any bare wires outside the heat shrink tubing). Apply hot forced air, 266° F or higher, to the solder ring until the solder melts and the tubing shrinks tightly around the wire jacket. Inspect the bare wires in the center of the butt connector to ensure they are still crossed and the solder is melted to each wire. The adhesive melts with the solder and the tubing shrinks to give the splice a water tight seal. Heat guns (like our 370-364) reach the desired temperature quickly and work the best. A very hot hair dryer may also work. The 1.06" (27 mm) long clear transparent sleeve with white rings identifies that these solder butt connectors are for 26 to 24 gauge wire.

Specification:




Manuals & Resources:

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Customer Reviews
0 reviews
Be the first to review this item!
Write a Review