skip to footer block
MSZ Permatex 14600 Permatex 14600; Cold Weld Bonding Compound 1Oz P15369331MSZ-PMT-14600 https://cdnimages.opentip.com/full/MSZ/MSZ-PMT-14600.jpg Permatex 14600 Permatex 14600; Cold Weld Bonding Compound 1Oz Manufacturer Part Number: 14600Permatex 14600 Cold Weld Bonding Compound 1OzCold Weld Bonding Compound 15 minute, two-part adhesive and filler system that hardens like steel and eliminates the need for welding or brazing. Once cured, it can be drilled, sanded, painted or filed. Resists most automotive, shop and cleaning fluids. Withstands temperatures to 300° F intermittent. Over 3,000 psi shear strength on steel. Suggested Applications: aluminum, steel, brass, bronze, castings and stampings.Attributes: Size = Two 1 oz. tubes Cold Weld, Steel Reinforced 8 min. set time. 16 hour cure time. Up to 300 PSI strength. Dries dark grey. Bonds to: Aluminum, brass, bronze, copper, iron, stainless steel, & steel. One hardener / One resin. Permatex Cold Weld is a two-part, high strength, cold welding epoxy that can be drilled threaded, machined, filed or painted once fully cured. Has a test-proven shear strength greater than 3,000 PSI after 16 hours. Resistant to shop fluids, including diesel fuel, gasoline, antifreeze, water, oil, transmission fluids, and hydraulic fluids. Temperature Range: -60 degrees F to 300 degrees F continuous, -60 degrees F to 350 degrees F intermittent. Assembled Product Weight: 0.16 lbBrand: PermatexMaterial: MultiManufacturer Part Number: 14600Manufacturer: PermatexColor: BronzeAssembled Product Dimensions (L x W x H): 4.84 x 3.54 x 0.44 InchesInstructions: Directions: 1. For best results: Roughen, remove any grease and oil, clean and dry surfaces to be joined or repaired. 2. Remove tube caps. Pierce end of tubes with the back of cap. 3. Squeeze equal amounts of Resin and Hardener onto a discardable surface. Squeeze with equal pressure from bottom of tubes so diameter of bead is uniform. 4. Mix thoroughly until evenly colored. 5. Apply to surfaces to be joined or repaired. Epoxy starts to set in 8 minutes and reaches usable strength in 16 hours. When storing, clean caps and tube threads. Replace caps to original tube (color coded), or hardening may occur in tube nozzles. 15369331 686226146007 712.0000lbs 0.00 0.00 0.00
Permatex
6.3800 2025-07-16 24 In Stock

Permatex 14600 Permatex 14600; Cold Weld Bonding Compound 1Oz

Brand Permatex
Shop more from MSZ

UPC: 686226146007
SKU: MSZ-PMT-14600
Price: $6.38
Quantity:
24 In Stock
*  Shipping Note: Usually ships within 1 to 2 weeks.
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: 14600

Permatex
14600
Cold Weld Bonding Compound 1Oz

Cold Weld Bonding Compound
15 minute, two-part adhesive and filler system that hardens like steel and eliminates the need for welding or brazing. Once cured, it can be drilled, sanded, painted or filed. Resists most automotive, shop and cleaning fluids. Withstands temperatures to 300° F intermittent. Over 3,000 psi shear strength on steel. Suggested Applications: aluminum, steel, brass, bronze, castings and stampings.

Attributes:
Size = Two 1 oz. tubes

  • Cold Weld, Steel Reinforced
  • 8 min. set time. 16 hour cure time. Up to 300 PSI strength. Dries dark grey. Bonds to: Aluminum, brass, bronze, copper, iron, stainless steel, & steel. One hardener / One resin. Permatex Cold Weld is a two-part, high strength, cold welding epoxy that can be drilled threaded, machined, filed or painted once fully cured. Has a test-proven shear strength greater than 3,000 PSI after 16 hours. Resistant to shop fluids, including diesel fuel, gasoline, antifreeze, water, oil, transmission fluids, and hydraulic fluids. Temperature Range: -60 degrees F to 300 degrees F continuous, -60 degrees F to 350 degrees F intermittent.


Assembled Product Weight: 0.16 lb
Brand: Permatex
Material: Multi
Manufacturer Part Number: 14600
Manufacturer: Permatex
Color: Bronze
Assembled Product Dimensions (L x W x H): 4.84 x 3.54 x 0.44 Inches

Instructions: Directions: 1. For best results: Roughen, remove any grease and oil, clean and dry surfaces to be joined or repaired. 2. Remove tube caps. Pierce end of tubes with the back of cap. 3. Squeeze equal amounts of Resin and Hardener onto a discardable surface. Squeeze with equal pressure from bottom of tubes so diameter of bead is uniform. 4. Mix thoroughly until evenly colored. 5. Apply to surfaces to be joined or repaired. Epoxy starts to set in 8 minutes and reaches usable strength in 16 hours. When storing, clean caps and tube threads. Replace caps to original tube (color coded), or hardening may occur in tube nozzles.


This item is overweight. we may contact you when we process the order.

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item


Look Similar Items By Category


Customer Reviews
0 reviews
Be the first to review this item!