fixed my glovebox door saved me 200.00 !!!!!!!!!

I used this product to fix a side mirror on a 2010 subaru outback.For whatever reason, subaru decided not to use folding mirrors on this model (at least mine anyway).So while driving forward through an atm line at a scumbag bank im never going back too. There was a pothole i didnt see and these 2 yellow poles. I was close to the poles but, the pothole moved my car down n to the side slightly. Just enough to catch the mirror and it put a little crack down the side of it.So I looked up ways to fix it.I initially used a hot iron for soldering, and that seemed to work, but looked terrible.A week later that did not hold.So I got this.I moxed up a little bit, smells absolutely horrific. Worst smelling product ever.I didnt let the smell deter. Even though my senses were screaming; dont breathe this in. Fortunately, the effects of the chemicals pouring from this magical mixture, going straight to the dome, were such that I had no ability to control all motor skills. Life was bleak. The world went dark for a moment. Silence is usually tranquil, except for when you think its the end. Then, I opened the garage door to the safety of my neighbor grilling out, which eventually was enough to make me realize how hungey I was, man was I hungry. Also brought in some welcomed fresh air.Next, I apply this magic paste. It was not easy to make it look uniform at all. So I applied it the best I could. Held it together with a vice grip style lock for a about a min. Slowly let it go to realize it did take.Wainted it out for a min.The next results: very nice.This stuff cures like concrete. I mean no difference between the original plastic and this. Its absolutely amazing stuff. It works and it saved the day for me as im not interested in buying a side mirror for my 2010 outback that is basically a highway work vehicle.I will absolutely use this product again.I kinda wish they made even smaller packs of this stuff as this was waaaay more than needed and although it does come with a cap to place on the end when finished, it conveniently doesnt fit well. My assumption is so when you go to use it again, it'll probably not be good. Time will tell.Anyway, its been about 2 or 3 weeks now and its holding up perfectly and i drive about 70 to 75 mph everyday, to and from work 36 miles 1 way. This stuff works great. It actually cures to about the same color as the original black mirror was, so its not a very obvious eyesore.

This stuff works very good. I repaired a motorcycle headlight assembly (not the clear part), and was able to sand and paint it afterwards.

Nice

Used it to fix a broken bmw bumper tabs, quick cure time and hardness needed. Good value considering the alternative of replacing an entire front end

Nozzle broke off in tube, product was unusable.

Great plastic fix and it is also a great all purpose fix.

Worked perfectly

Used to fix black plastic end piece on boat hook. Adhered to jagged edges and holds well. Cant even tell the end piece was ever broken

Used this stuff on a broken cover on my snowblower and it welds the plastic like it's original composition.Could not be more pleased with it. The stuff works fast once its mixed and has a five minute set time onit. After 24 hours its like steel and still has a little give. Could not be happier with it.......

I have a 20 year old truck and one of plastic dashboard brackets had cracked. That part is no longer available.So, I took a sheet of ABS plastic, cut it, heated it and formed it into a shape to cover and strengthen the cracked bracket. I mixed some of this stuff up, spread it over the cracked bracket and then fit my new ABS reinforcement piece onto it. I let it sit overnight and the next day it was as solid as a rock. If you tried to pry it off, you probably couldn't. This stuff is great, super strong and it had no problem bonding the ABS to a dissimilar plastic that the dashboard bracket was made off. Worked great.

This epoxy was used to seal two panels of a shower stall. It appears to melt the plastic that it adheres to, fusing it together. Since the epoxy is black and the shower is white, I then covered it with a bead of white calk. I anticipate no leaks for the life of the installation.

Bonded mounting tab on ABS plastic motorcycle cover well. Even removed in reinstalled the cover and the bond held.

I had installed a aftermarket radio in my car, and some of the trim broke during removal, that plastic is brittle on old vehicles. I got this to repair the plastic clips and boy did it do a great job! I would say it has bonded harder than the factory plastic. Thank God.

Worked very well

I purchased this item to use when refurbishing small electronic. It's ideal for small and large project.

For hard black plastic this stuff is pure magic! Best stuff ever.

I bought this to repair a ring with a piece of black Onex broken out. Color matched. Strong. Easy to use, use the container it comes in and break off the stir stick that in the handle. Only one thing, it smells bad while curing..

I repaired the $650 hood on a John Deere LA 145. The black plastic front end, which supports the hood support axle, had broken completely off. The mower is 11 years old and I only had the bottom piece of the support portion. I glued it back on and then added additional pieces of 3/16 plastic sheet that I had in the shop. This glue did a phenomenal job of re-attaching and rebuilding the unit. I used two tubes and saved about $600 vs buying a new hood.

Used for an Arrma Granite chassis to seal some holes and cracks. Easy prep and application with the right tools. Dries pretty quick, like 15 or so minutes. Only recommendation would be to use this in a well ventilated space. Odor is strong. Other than that, it's great.