0 reviews
Be the first to review this item!
Product Description
Manufacturer Part Number: 84334
A two part, hand kneadable, putty type epoxy stick used for repairing metal gas tanks and containers. Contrasting colored materials are mixed together to form a uniform color to indicate thorough mixing. The resulting cured adhesive can be drilled, sanded, threaded or filed and it is resistant to fuels and most solvents after full cure.
Brand: Permatex
Manufacturer Part Number: 84334
Manufacturer: Permatex
Assembled Product Dimensions (L x W x H): 7.88 x 2.88 x 1.13 Inches
Instructions: Directions: 1. To achieve optimum adhesion, clean grease or dirt off surfaces to be repaired. 2. Wearing gloves twist or cut off required amount. 3. Mix by kneading epoxy stick to a uniform color. If mixing is difficult, warm epoxy stick to room temperature or slightly above. 4. Apply to the repair surface within 30 minutes of mixing, forcing into any cracks or holes to be filled. Remove excess material with a tool moistened with clean water before hardening begins. Note: When applying to a damp, wet or slowly leaking area, work the mixed epoxy into the surface and apply pressure until adhesion begins to take effect. Fuel tank repair epoxy sets in 1 hour, can be machined in 5 hours, and fully cures in 24 hours. Does not adhere to polyethylene or polypropylene plastics. This material is not intended for structural bonding. Temp Range: Up to 250 degrees F (continuous), up to 300 degrees F (intermittent).
A two part, hand kneadable, putty type epoxy stick used for repairing metal gas tanks and containers. Contrasting colored materials are mixed together to form a uniform color to indicate thorough mixing. The resulting cured adhesive can be drilled, sanded, threaded or filed and it is resistant to fuels and most solvents after full cure.
- Two part, hand kneadable, putty type epoxy stick
- Used for repairing metal gas tanks and containers
- Contrasting colored materials are mixed together to form a uniform color to indicate thorough mixing
- Cured adhesive can be drilled, sanded, threaded or filed
- Resistant to fuels and most solvents after full cure
- Sticks to gasoline wet metal
Brand: Permatex
Manufacturer Part Number: 84334
Manufacturer: Permatex
Assembled Product Dimensions (L x W x H): 7.88 x 2.88 x 1.13 Inches
Instructions: Directions: 1. To achieve optimum adhesion, clean grease or dirt off surfaces to be repaired. 2. Wearing gloves twist or cut off required amount. 3. Mix by kneading epoxy stick to a uniform color. If mixing is difficult, warm epoxy stick to room temperature or slightly above. 4. Apply to the repair surface within 30 minutes of mixing, forcing into any cracks or holes to be filled. Remove excess material with a tool moistened with clean water before hardening begins. Note: When applying to a damp, wet or slowly leaking area, work the mixed epoxy into the surface and apply pressure until adhesion begins to take effect. Fuel tank repair epoxy sets in 1 hour, can be machined in 5 hours, and fully cures in 24 hours. Does not adhere to polyethylene or polypropylene plastics. This material is not intended for structural bonding. Temp Range: Up to 250 degrees F (continuous), up to 300 degrees F (intermittent).
This item is overweight. we may contact you when we process the order.
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Note
This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item
Look Similar Items By Category