skip to footer block
PDL Pondmaster 12746 Pond Mag Pump Impeller/Magnet Pond Mag 9.5 P3961986PDL-12746 https://cdnimages.opentip.com/full/PDL/PDL-12746.jpg Pondmaster 12746 Pond Mag Pump Impeller/Magnet Pond Mag 9.5 Manufacture part number: 12746Imp/Mag PM9.5BItem #Description12555Impeller/Magnet for Pond-Mag 2 Pump12575Impeller/Magnet for Pond-Mag 3/5 Pumps12585Impeller/Magnet for Pond-Mag 7 Pump12746Impeller/Magnet for Pond-Mag 9.5 Pump12756Impeller/Magnet for Pond-Mag 12 Pump12776Impeller/Magnet for Pond-Mag 18 Pump12780Impeller/Magnet for Pond-Mag 24 Pump12790Impeller/Magnet for Pond-Mag 36 Pump 3961986 00025033127456 2.0000lbs 0.00 0.00 0.00
Pondmaster
43.9900 2025-07-19 In Stock
customer review - by , August 8, 2013
4/ 5stars
this is an exact replacement for the model 9.5b pump. it saved me from having to replace the entire pump.it was excellently packaged in a small box with small peanuts to keep it safe during transport.
customer review - by , June 6, 2013
5/ 5stars
Replaced the impeller and my pump was back to 100%. I keep a spare pump and I swap them out when the preformance drops. Then I replace the impeller and put it on the shelf for when I need it again.
customer review - by , May 5, 2013
5/ 5stars
Original impleller shaft had broken and pond pump had quit.This fixed it for a fraction of the cost of a new pump.
customer review - by , April 4, 2013
5/ 5stars
Would recommend replacing the impeller over replacing the entire pump. Easy to install. Perfect fit. Greatly improved overall functioning of my pump.
customer review - by , March 3, 2013
4/ 5stars
Even when my pump became filled with rocks it still worked. We replaced with a new one and kept the old one for a spare. Very easy to change out and pump now works like new. The pump also works great.
customer review - by , March 3, 2013
4/ 5stars
In general Danner produces the best pumps for aquarium and pond use. Have used many of their pumps and this was first to require a replacement impeller. Likely snail got past foam filter and ruined impeller.
customer review - by , November 11, 2012
5/ 5stars
So this part worked just right for my mag9.5. Even after cleaning the old impeller several times, it was just dead. So I bought this part and the pump works great again!
customer review - by , June 6, 2012
5/ 5stars
Fits my old Pondmaster 9.5 B Submersible Pump (950gallon) after the cylinder ceramic shaft broke inside of my old impeller. Make sure the new impeller is fully seated before replacing cover.. mine took some wiggling around to get it to seat properly. ''Carefully'' & slowing hand screw the cover back into place. don't over tightener it otherwise you are going to break the ceramic shack inside the impeller. If the cover doesn't go on properly.. you may need to remove & retry putting the impeller in place. It took me two tries before I was able to gently get the impeller to go in completely so that the cover fit.
customer review - by , September 9, 2011
5/ 5stars
This replacement impeller fixed the issue I had with my old impeller that was broken. It perfectly fit for my Mag Drive 9.5B pump. Shipping was really fast, I really recommend this product and this supplier.
  »  
  »  
  »  
  »  
  »  

Pondmaster 12746 Pond-Mag Pump Impeller/Magnet - Pond-Mag 9.5

stars Rating 5 | 9 reviews
Brand Pondmaster
Shop more from PDL
UPC: 00025033127456
SKU: PDL-12746
Price: $43.99
Quantity:
Shipping:
$16.71 To [ 43215 ]
In Stock
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacture part number: 12746
Imp/Mag PM9.5B

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Product Warranty

This item has one-year warranty.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Customer Reviews
5 out of 5
see all 9 reviews
5 stars
6
4 stars
3
3 stars
0
2 stars
0
1 stars
0
Write a Review
By CHTX
Date: August 12, 2013
this is an exact replacement for the model 9.5b pump. it saved me from having to replace the entire pump.it was excellently packaged in a small box with small peanuts to keep it safe during transport.
Rating: 4 stars [4 of 5 Stars!]
By Jhon "Jhon"
Date: June 23, 2013
Replaced the impeller and my pump was back to 100%. I keep a spare pump and I swap them out when the preformance drops. Then I replace the impeller and put it on the shelf for when I need it again.
Rating: 5 stars [5 of 5 Stars!]
By Don From Tenocee
Date: May 15, 2013
Original impleller shaft had broken and pond pump had quit.This fixed it for a fraction of the cost of a new pump.
Rating: 5 stars [5 of 5 Stars!]
By Tanya Locke
Date: April 08, 2013
Would recommend replacing the impeller over replacing the entire pump. Easy to install. Perfect fit. Greatly improved overall functioning of my pump.
Rating: 5 stars [5 of 5 Stars!]
By HappyHat
Date: March 26, 2013
Even when my pump became filled with rocks it still worked. We replaced with a new one and kept the old one for a spare. Very easy to change out and pump now works like new. The pump also works great.
Rating: 4 stars [4 of 5 Stars!]
By bobrfish
Date: March 18, 2013
In general Danner produces the best pumps for aquarium and pond use. Have used many of their pumps and this was first to require a replacement impeller. Likely snail got past foam filter and ruined impeller.
Rating: 4 stars [4 of 5 Stars!]
Items 1 - 6 of 9 reviews
 1  2  [Next]