The towing experience with this hitch is very good. Some chucking, I think due to the adapter ball sliding up and down in the coupler tube, but nothing major. Hitching up is a pretty forgiving process, though I am glad for the Andersen buckets under the front jacks 'cause they have to stretch more than usual. Putting it away is a one-person job. Not a fast process, but after several cycles my speed and comfort level are good.

Great looking hitch, it's heavier than advertised but easy to move just the same. Box was absolutely destroyed and was held together by plastic wrapping. Luckily all pieces and parts were still in what was left of the box. Manufacturer really needs to package this hitch better.

Light enough for me to install and remove by myself, pretty easy to hitch line up and hitch, tows pretty well but get some rocking when the set up harmonizes with the road. It's been a while, but my 5th wheel with the flexing pin box seemed a bit smoother.I advise against using the Pullright ball in the Ford factory puck, their ball sits very high and causes the lockdown bolt to stick up so high top of the bolt is almost level with the lip of the receiver funnel and you can't use a socket to torque the lock down nut.Installation - some confusion and delay because the sizes of the nuts and bolts in the installation instructions did not match the sizes on the hitch that I received, they were all larger than the instructions stated.

Put this in my 2019 Silverado short bed with factory puck system. It's light weight and easy to install. Once the initial adjustments are made it takes less than 5 mins to install or remove. The additional offset give me enough cab clearance so I don't have to worry about my 5th wheel hitting the cab corners.

This gooseneck to 5th wheel hitch is an awesome product. It's very sturdy and fits tightly to my BW gooseneck ball/hitch. It has offset adjustment at the ball and on the kingpin adapter to help with shortbed trucks. I installed this on my 2022 Ram 2500 Megacab with a 6.4' bed and the camper clears the cab at a sharp 90 degree angle. The height is also adjustable. It's may not be as light as others, probably weighs just under 50lbs. There is a lot of different bolts to torque and the install/Uninstall sequence needs to be in a specific order so this isn't as easy as they make it sound. It's not hard just follow the procedure. I got some deep well sockets and a 1/2 torque wrench to keep in the 5th wheel. I like how hefty the construction is and also the rails that lay on the bed, under the base feet, to distribute weight more evenly across the truck bed. I also like the cup on the hitch as opposed to other designs where it's on the 5th wheel kingpin because this allows you to hitch up at any angle and tilt (easier for the truck to shift around while lowering the trailer). I also like that the ball release isn't a cable mechanism I need to attach to the camper. Overall glad I got this one and happy with how it handles while towing.

I had to replace my PullRite 2600 20k 4 point 5th wheel hitch fro. My 2016 GMC truck because my new 2021 truck's puck system was 6 narrower. Why???? Anyways, I loved my old Pullrite hitch so I replaced it with the single point hitch that attaches to a gooseneck ball. Actually it seems like it is more secure than the 4 point hitch system.

Love this hitch !Easy to install(just have a torque wrench, and a couple larger sockets) Easy to use, and hitch/unhitch. Easy to get in and out when needed.. I like it much better than the simular Andersen unit. Made of steel, and just a few pounds heavier.. Win-Win !!

Haven't towed with it yet, which is it's primary function, but it sure looks good installed in the back of my truck.

I absolutely love this hitch. Very well designed, and easy to install and use. I decided on this hitch for our short bed RAM 3500 over a traditional 5th wheel slider hitch to save on cargo capacity. I had my concerns of towing with a short bed without a slider, but it has been a non issue. I've never even come close to hitting the cab. The connection point actually sits back a little farther than a traditional connection, which gets a a few more precious inches. I also love being able to hook up from any angle, and not having to do a tug test... since it's a ball I know it's locked in place! The hitch even has multiple points to attach safety chains so it was very easy to do. I like that the hitch is also made from steel (unlike the similar Andersen hitch), making it feel VERY strong. I would definitely recommend this hitch. Ignore bad reviews that are simply due to packaging. Is that really what you're concerned with when shopping for something that you plan on towing thousands of pounds safely with?!

Pullrite was very helpful in getting me the parts that were missing. Hitch come in dented, missing paint, and parts. There was no box when delivered. See stickers from UPS all over frame. The King pin adapter, pull handle and one lower bed support missing. I waited for this to 7 days for this to get here and now have to wait 3 days longer to get new trailer home. I give Pull rite 5 stars for helping me get the parts to make this works.

did not show up with king pin adapter

I read all the complaints about packaging. Mine came similar with really crappy packaging and hardware falling out of the box in my driveway. All four corners are dinged up, but won't affect function. I was not missing any hardware. For those that find they are missing hardware, do not hesitate to contact Pullrite directly and request parts. Their customer service is amazing and I have no doubt they will send out parts without any hesitation.