5 out of 5
Customer Reviews
By
Fatso00
Date: October 15, 2023
Hand tapped stripped threads on firearm. Worked!
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By
GraceHeart Services LLC
Date: October 12, 2023
I use these Taps in my welding shop . . . Excellent quality. I will definitely continue to buy these taps.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Louis Lovasco
Date: September 12, 2023
So far, so good. Cleans threads great. Time will tell if it holds up after many uses.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
noah Hite
Date: August 29, 2023
As long as you aren't an invincible, it works perfectly. Thank you!!!
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Sean Burke
Date: August 20, 2023
only using this to tap plastics, but it does the job pretty good so far
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
5 Shots
Date: August 09, 2023
Not sure what to say other than, it was cheap and got me out of a jamb. Tryed to buy just a 1/4-28 stand alone but no one had just the one Tap, cheapest place was Harbor Fright and I did not need another set of something setting in my tool box
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
John Garcia
Date: July 31, 2023
Received as advertised and as scheduled
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Customer
Date: July 28, 2023
Works in aluminum. Took my time. Aluminum felt gummy.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Laverne Otto-Phitre
Date: July 08, 2023
Purchased to rethread a dozen or so M4 brass drawer pull knobs to 8-32 so I could use extra screws I already had on hand from other projects, vs. buying a bunch of longer M4 screws at a higher price. Worked very well with a little Tap Magic cutting oil to prevent galling and chatter.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Mark Feblowitz
Date: May 27, 2023
I needed to tap a piece of metal on my shower valve. This tap, along with the handles I bought separately, did the trick. This was a hand tap. But it says it's suitable for high speed tapping. Maybe I'll try that, too.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
A Customer
Date: May 21, 2023
It broke on me but to be fair you take a risk each time you use a drill instead of a tap/die bar.It cut through thin gauge steel (my original reason for buying it) without tap fluid easy.It made it through 10 out of 12 deep aluminum holes with fluid before snapping.To be fair, and hence my 5 star, I knew the risk from using a drill for it and it was an afterthought. Some slide/rail parts I got only had half of the holes tapped for whatever reason, and I noticed they were 10-32 so I finished em with this guy.If I had an originally bigger purpose for purchasing, I would have paid $10 for a solid tap bit, but since I initially bought this for literally 4 tiny holes, and it was $3, I'll give it 5 stars
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Yurky
Date: May 21, 2023
Good price, fair deal.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
JERRY HARDEN
Date: May 13, 2023
Put threads in a piece of metal
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
James
Date: May 10, 2023
They work well.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Shannon W.
Date: March 28, 2023
works as advertised
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Pat seng
Date: March 05, 2023
Haven't break yet
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
JTF
Date: March 01, 2023
Good tap. Labeled as HSS. Tapered with two flutes, bright HSS. Cuts fine. No country of origin on tap or package that I can see. Good deal for the price.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Anthony Roteliuk
Date: February 15, 2023
1/4-20 two flute spiral point taps were too brittle and with too small a cross section to successfully tap a 13/64 hole through 1/4 thick mild steel bar without breaking using a hand tapping wrench and cutting oil. Broke both taps I bought in the same hole (first one I tried them on); could not apply enough torque to cut to full thread depth before the tap broke. I was very gentle with the second tap and kept backing it out. Didn't help. At least the deep flutes allowed me to twist and break up the tap remnant left in the hole with needle-nose pliers. Crumbled like glass. Was able to successfully tap the holes with a US brand four flute taper tap easily.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Z. Patterson
Date: January 20, 2023
I got the 1/4-20 tap and it was very sharp and strong. Just remember when tapping by hand, be sure to use tapping fluid and to back out your tap and clear out the chips as soon as you see or feel the tap itself starting to twist, and repeat until done, don't push the tap any farther than that or you risk it breaking it. I used this tap in 8 holes in 3/8 in thick steel of my 1,000 lb capacity garden wagon frame, and it was still sharp as new.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Hy D. Tran
Date: January 04, 2023
Which is what I needed it to do...
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]