5 out of 5
Customer Reviews
By
steve allen
Date: April 16, 2023
Worked great
Rating: 
[5 of 5 Stars!]
[5 of 5 Stars!]
By
Bingejeeping
Date: March 26, 2023
Perfect for the price point, zero issues good quality and did the job as intended..
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
T.H.
Date: February 11, 2023
I had an antique made of cast iron and had several crusted shut or heavily rusted bolt holes. I bought this tap in the 1/2-12 size. It opened, chased and rethreaded all the holes without skipping a beat. I locked the tap in a pair of Vise Grip pliers and turned slowly. It cut right through the rust first pass and brought those 80 year old bolt holes back to life. I was really impressed with the quality of the tap for the price.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Gary Eischen
Date: December 31, 2022
Excellent product
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Scott K.
Date: December 18, 2022
Needed a bottoming tap for a hole that needed to be fairly shallow. After running the regular tap in and out, I followed up with this one and all was perfect. Arrived quickly and works great. May not need again for a while but I know its there when I do.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Natanael M.
Date: November 25, 2022
It does what it supposed to for me.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
michael c jamison
Date: November 20, 2022
Used this tool to clean out threads for rock rails on a Toyota Tacoma. Sprayed a little WD 40 on threads and screwed it in. It worked flawlessly. Now all of the bolts fit as they should.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Waylon DeSilva
Date: November 19, 2022
Excellent tool to fix stripped out threads.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Jordan Smith
Date: November 16, 2022
Good quality and cuts through aluminum like butter.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Steven J. Kimball
Date: November 07, 2022
Well made item.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Ed
Date: November 06, 2022
Works as needed
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Larry Skillin
Date: October 04, 2022
Lawnmower repair
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Akp
Date: September 21, 2022
Bought this to clean up threads on a trailer hitch mount. Chucked it up in a drill since I wasn't expecting much issues, but the drill chuck destroyed the shank as if it were annealed - never seen that happen so easy/quick.Turned to a hand held tap wrench. The first nut I went through completely wore out all the cutting teeth on all 4 flutes. The condition of the nut is the exact same as before.Sometimes thread repairing can be hard on taps depending on nut material/condition - but this job was not particularly demanding, a single decent tap should have been able to do all the nuts I have to do.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Charles
Date: September 20, 2022
Every few years I fall in to the trap of buying cheap taps... Don't do it. Buy quality taps.Tried cutting threads in 4130 (annealed) and the tap felt like it was about to break. Made it 2 threads in before I stopped.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
choochooman
Date: September 16, 2022
I had a Craftsman tap that I tried using. I was tapping the center of a grade 5 bolt so I could screw a smaller bolt in the middle of it. The Craftsman tap was hard to turn and ended up twisting. I used the Drill America tap and had no problems. It worked smoothly and tapped all the way down to the bottom of the hole.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
rtrski
Date: September 15, 2022
Used to tap some profile end holes in 8020.net branded T-slot aluminum extrusion, size 4080 (light). The pre-existing extrusion central pair of holes were already the perfect size for this dia tap.Didn't even bother with tapping oil, just swiped it with a touch of lithium grease I happened to have nearby, slotted it into the squirrely little two-screw-style T-grip 'handle' and went to town. 4 flutes helped the swarf loosen right out, only had to back up a half turn about every 3-4 turns to start, then about every other once getting pretty deep, so it didn't feel like it was binding up too much.Bolts threaded right in nicely afterward, so obviously it worked. Not giving it a rating for durability though because I obviously didn't challenge it, but appears to be in fine shape for more of the same when I need to next time.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
LED
Date: August 18, 2022
Worked great.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
A Customer
Date: August 11, 2022
Worked as promised!
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Michael A
Date: August 07, 2022
Cuts quickly and cleanly at a good price.
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]
By
Robert G. Manzo
Date: August 06, 2022
Engine rebuild
Rating: [5 of 5 Stars!]
[5 of 5 Stars!]