I bought a home with a tiny bathroom cabinet that was absolutely useless! My husband installed this cabinet mount bracket and turned the unusable cabinet into a very functional drawer where he installed a pull out shelf unit for me to store my hairdryer and hair appliances out of sight. Now I'm trying to see where else I can use this to make a cabinet into a drawer, like possible in the kitchen and convert a cabinet into a drawer for the trash cans!The only issue was with the installation. He had to make adjustments to get the brackets to line up with the door to fit evenly and this was not mentioned in the instructions.Otherwise - PERFECT!!!!!! Money well spent!!!!

Arrived on time. Easy add on to make my trash can door pull out.

This is an absolutely necessary purchase, if you want to attach your trash pullout to your cabinet door (also other products, but this is what I used it for). Two drawbacks, imo: price, and instructions. This is very expensive for what it is, especially when I've already spent over $100 on the trash cans and pullout unit; but I want the brand name, not a knockoff. Also, the instructions. They are minuscule in font size, and leave out a very important step for people like me, who don't know that the screws/nuts attaching the bracket to the pullout frame need a wrench to tighten them properly. I bought 3 sets of brackets, thinking I bought the wrong one each time! They can't simply be tightened with a screwdriver or drill, you need a wrench to tighten them enough to be tight and sturdy. I wish I had known that the first time, but I eventually got there. It's a good product, just expensive. But once it's installed, you're set.

This kit allowed me to attach my cabinet face to my trash can pull out kit. The instructions were very clear and matched up to the trash pull out kit making installation a breeze

Adjustable

Adjustable

I built an under cabinet trash bin and needed to add a door/drawer face. Easy install and is very sturdy

I built an under cabinet trash bin and needed to add a door/drawer face. Easy install and is very sturdy

Added this kit to current Rev product. Simple to install and great results. Glad I got it.

worked well in mounting door for pull out trash bin in remodel situation

I just finished installing these in seven of our kitchen cabinets as icing on the kitchen remodel cake. Really tired of getting down on the floor to pull out the heavy mixer or juicer from the back in the bottom of a dark cabinet.Pros: Nice chrome finish and fairly sturdy. I would have preferred the Rev-A Shelf birch wood units but too expensive for our budget. These are reasonable in comparison. Assembly of the unit is about 10 minutes.Cons: Installation took a couple hours for the first one. Maybe 20-30 minutes for each additional unit. Some things were not obvious. See tips below.Several assembly screws easily snapped off. Glad there were extras.My experience:The units are 1/2 smaller than the cabinet opening. I ordered for an 18w cabinet opening and the unit is 17.5w. That allows for clearance for protruding door hinges. The instructions said to mount the unit away from the door hinges (off center in the cabinet) which leaves a 1/2 gap on the hinge side. That side just stands in the air unattached or anchored. Being off center bothered me. I would need to add some kind of blocking to move the units to a centered position.In my case I also ordered the door mounts to convert the doors from hinged to a pull out configuration.That's where my confusion started. The door mount brackets were off center from the doors position directly below the drawer because the units were installed off center. I didn't have enough door frame to mount the door that off center. There are round discs (spacers) included with the door mount bracket kits that will allow you to move the brackets left or right but it looked odd to me.I realized that I could use the round discs (spacers) to center the whole unit by using the spacers in between the unit frame and the door frame on either side. The four spacers provided at the four front anchor points. I had to provide longer screws to make this work. The result was a centered unit in the cabinet opening with a centered door pull. See pictures of the spacer positions.Tips:1. Hand tighten the assembly screws. They snapped easily with a screw gun, even with the drag set low.2: If you are installing the door brackets (separate kit) use the spacers to center your unit in the cabinet opening rather than off center. See pictures3: Install the drawers so that you are sure the brackets that attach to the back of the cabinet are truly parallel and won't bind the drawer slides. Mark the holes, remove the drawers and mount the rear brackets. Then attach the unit to the bottom/base with the four screws provided.4: Mounting the door to the brackets: Attach the brackets to the bottom drawer. Tighten the screws just until the brackets stay in place but can still move if pushed with some force. Apply the the double stick tape to the bracket faces. Pull the drawer slightly so that it just sticks out beyond the cabinet face. Line up the door panel under the drawer face right to left and also the door top down from the bottom of the drawer face. Press firmly in toward the brackets so that the brackets adjust from the pressure and the double stick tape adheres to the door panel.. Carefully open the door/drawer and attach the screws.Note: The instructions said to face the brackets outward. This did not work for our doors so we turned them inward.

Solid quality. Might be tricky to correctly line up location for attachment to door, if you're not handy. Seems a bit pricey to me, especially since it's required on top the the cost for Rev-A-Shelf RV-12KD-17C.

Solid quality. Might be tricky to correctly line up location for attachment to door, if you're not handy. Seems a bit pricey to me, especially since it's required on top the the cost for Rev-A-Shelf RV-12KD-17C.

Fits perfect with other Rev A Shelve products

Fits perfect with other Rev A Shelve products

It took a number of iteeratiions before the door lined up well with other doors and oue side ot the top or bottom didn't stick out. Yes, I'd buy it again, just a minor pain, but I don't see an easier way to construct it

It took a number of iteeratiions before the door lined up well with other doors and oue side ot the top or bottom didn't stick out. Yes, I'd buy it again, just a minor pain, but I don't see an easier way to construct it

If you put in an undercover trash system, this is the way to go!!

If you put in an undercover trash system, this is the way to go!!

I decided to use the door mount kit. It does take some minor adjustments with the spacers and etc. to properly get the door to close flush.