skip to footer block
HDL Rev A Shelf RV DM17 KIT Door Mount Kit for Silver RV Series Pullout Waste Bins P12662132HDL-RSRV-DM17-KIT https://cdnimages.opentip.com/full/HDL/HDL-RSRV-DM17-KIT.jpg Rev A Shelf RV DM17 KIT Door Mount Kit for Silver RV Series Pullout Waste Bins Manufacturer Part Number: RV-DM17-KITDoor Mount Kit for RV SeriesOptional door mount for RV seriesEpoxy coatedDoor Mount Kit for RV SeriesProduct SKUColorUnitRV-DM17-KITSilverEA 12662132 090713049397 3.0000lbs 2.00 5.50 9.00
Rev-A-Shelf
35.9900 2026-01-23 327 In Stock
customer review - by , August 8, 2023
5/ 5stars
Arrived on time. Easy add on to make my trash can door pull out.
customer review - by , August 8, 2023
4/ 5stars
This is an absolutely necessary purchase, if you want to attach your trash pullout to your cabinet door (also other products, but this is what I used it for). Two drawbacks, imo: price, and instructions. This is very expensive for what it is, especially when I've already spent over $100 on the trash cans and pullout unit; but I want the brand name, not a knockoff. Also, the instructions. They are minuscule in font size, and leave out a very important step for people like me, who don't know that the screws/nuts attaching the bracket to the pullout frame need a wrench to tighten them properly. I bought 3 sets of brackets, thinking I bought the wrong one each time! They can't simply be tightened with a screwdriver or drill, you need a wrench to tighten them enough to be tight and sturdy. I wish I had known that the first time, but I eventually got there. It's a good product, just expensive. But once it's installed, you're set.
customer review - by , June 6, 2023
5/ 5stars
This kit allowed me to attach my cabinet face to my trash can pull out kit. The instructions were very clear and matched up to the trash pull out kit making installation a breeze
customer review - by , May 5, 2023
5/ 5stars
Adjustable
customer review - by , May 5, 2023
4/ 5stars
Adjustable
customer review - by , March 3, 2023
4/ 5stars
I built an under cabinet trash bin and needed to add a door/drawer face. Easy install and is very sturdy
customer review - by , March 3, 2023
5/ 5stars
I built an under cabinet trash bin and needed to add a door/drawer face. Easy install and is very sturdy
customer review - by , February 2, 2023
5/ 5stars
Added this kit to current Rev product. Simple to install and great results. Glad I got it.
customer review - by , February 2, 2023
5/ 5stars
worked well in mounting door for pull out trash bin in remodel situation
customer review - by , February 2, 2023
5/ 5stars
I just finished installing these in seven of our kitchen cabinets as icing on the kitchen remodel cake. Really tired of getting down on the floor to pull out the heavy mixer or juicer from the back in the bottom of a dark cabinet.Pros: Nice chrome finish and fairly sturdy. I would have preferred the Rev-A Shelf birch wood units but too expensive for our budget. These are reasonable in comparison. Assembly of the unit is about 10 minutes.Cons: Installation took a couple hours for the first one. Maybe 20-30 minutes for each additional unit. Some things were not obvious. See tips below.Several assembly screws easily snapped off. Glad there were extras.My experience:The units are 1/2 smaller than the cabinet opening. I ordered for an 18w cabinet opening and the unit is 17.5w. That allows for clearance for protruding door hinges. The instructions said to mount the unit away from the door hinges (off center in the cabinet) which leaves a 1/2 gap on the hinge side. That side just stands in the air unattached or anchored. Being off center bothered me. I would need to add some kind of blocking to move the units to a centered position.In my case I also ordered the door mounts to convert the doors from hinged to a pull out configuration.That's where my confusion started. The door mount brackets were off center from the doors position directly below the drawer because the units were installed off center. I didn't have enough door frame to mount the door that off center. There are round discs (spacers) included with the door mount bracket kits that will allow you to move the brackets left or right but it looked odd to me.I realized that I could use the round discs (spacers) to center the whole unit by using the spacers in between the unit frame and the door frame on either side. The four spacers provided at the four front anchor points. I had to provide longer screws to make this work. The result was a centered unit in the cabinet opening with a centered door pull. See pictures of the spacer positions.Tips:1. Hand tighten the assembly screws. They snapped easily with a screw gun, even with the drag set low.2: If you are installing the door brackets (separate kit) use the spacers to center your unit in the cabinet opening rather than off center. See pictures3: Install the drawers so that you are sure the brackets that attach to the back of the cabinet are truly parallel and won't bind the drawer slides. Mark the holes, remove the drawers and mount the rear brackets. Then attach the unit to the bottom/base with the four screws provided.4: Mounting the door to the brackets: Attach the brackets to the bottom drawer. Tighten the screws just until the brackets stay in place but can still move if pushed with some force. Apply the the double stick tape to the bracket faces. Pull the drawer slightly so that it just sticks out beyond the cabinet face. Line up the door panel under the drawer face right to left and also the door top down from the bottom of the drawer face. Press firmly in toward the brackets so that the brackets adjust from the pressure and the double stick tape adheres to the door panel.. Carefully open the door/drawer and attach the screws.Note: The instructions said to face the brackets outward. This did not work for our doors so we turned them inward.
  »  
  »  
  »  
  »  
  »  

Rev-A-Shelf RV-DM17-KIT Door Mount Kit for Silver RV Series Pullout Waste Bins, Price/Each

stars Rating 5 | 73 reviews
Brand Rev-A-Shelf
Shop more from HDL
UPC: 090713049397
SKU: HDL-RSRV-DM17-KIT
List Price: $39.99
Price: $35.99
You Save: $4.00 (10%)
Promo: $26.99 25% off limited-time offer. View More
Quantity:
327 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Price is for Each.

Manufacturer Part Number: RV-DM17-KIT

Door Mount Kit for RV Series

Optional door mount for RV series

  • Epoxy coated


Door Mount Kit for RV Series



Rev-A-Shelf RV-DM17-KIT Door Mount Kit for Silver RV Series Pullout Waste Bins

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Return Policy

We do not accept returns if the product has been tried to be installed.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Customer Reviews
5 out of 5
see all 73 reviews
5 stars
58
4 stars
12
3 stars
3
2 stars
0
1 stars
0
Write a Review
By Jes
Date: August 25, 2023
Arrived on time. Easy add on to make my trash can door pull out.
Rating: 5 stars [5 of 5 Stars!]
By H Fam
Date: August 10, 2023
This is an absolutely necessary purchase, if you want to attach your trash pullout to your cabinet door (also other products, but this is what I used it for). Two drawbacks, imo: price, and instructions. This is very expensive for what it is, especially when I've already spent over $100 on the trash cans and pullout unit; but I want the brand name, not a knockoff. Also, the instructions. They are minuscule in font size, and leave out a very important step for people like me, who don't know that the screws/nuts attaching the bracket to the pullout frame need a wrench to tighten them properly. I bought 3 sets of brackets, thinking I bought the wrong one each time! They can't simply be tightened with a screwdriver or drill, you need a wrench to tighten them enough to be tight and sturdy. I wish I had known that the first time, but I eventually got there. It's a good product, just expensive. But once it's installed, you're set.
Rating: 4 stars [4 of 5 Stars!]
By Dakotah Rector
Date: June 08, 2023
This kit allowed me to attach my cabinet face to my trash can pull out kit. The instructions were very clear and matched up to the trash pull out kit making installation a breeze
Rating: 5 stars [5 of 5 Stars!]
By Roncopopohauntis
Date: May 04, 2023
Adjustable
Rating: 5 stars [5 of 5 Stars!]
By Roncopopohauntis
Date: May 04, 2023
Adjustable
Rating: 4 stars [4 of 5 Stars!]
By Nicole Davis
Date: March 10, 2023
I built an under cabinet trash bin and needed to add a door/drawer face. Easy install and is very sturdy
Rating: 4 stars [4 of 5 Stars!]
Items 1 - 6 of 73 reviews
 1  2  3  4  5 ...  [Next]