skip to footer block
LNS T H Marine Supplies 7493 Relay P12433004LNS-119-7493 https://cdnimages.opentip.com/full/LNS/LNS-119-7493.jpg T H Marine Supplies 7493 Relay Manufacturer Part Number: 7493A completely new wire assembly will work with all of the CMC jack plates and trim & tilts that we have been making since 1990.7493: 12V 80-amp relay has a skirt, has replaced the 7312 relay and will plug into the same socket. Will not plug into the socket that was designed for the 7122.Description: 12V 80-ampReplaces: 7312 12433004 739697074932 0.3500lbs 1.50 4.00 6.00
T-H Marine Supplies
18.6800 2025-07-11 99 In Stock
customer review - by , July 7, 2023
5/ 5stars
Received products jack plate working great.
customer review - by , August 8, 2022
5/ 5stars
This relay is the best. I've tried 3 other relays none have been able to withstand powering my 50 amp fan. This one handles it like a champ. I'm using it with a waterproof hella wiring pigtail.
customer review - by , April 4, 2022
5/ 5stars
Was an exact replacement for CMC part 7493. My jackplate was not going up intermittently. I thought the problem was the 2 button switch on the console, but after checking the switch with my voltmeter, decided it was in the relays (part 7493) or possibly the actuator. I discovered something when I installed the new relay. There are 2 relays in the system, an up relay and a down relay, but the electrical current goes through both relays on each operation. On UP the up relay connects to the actuator motor and the down relay connects the motor to -. On DOWN the down relay connects to opposite side of the actuator motor and the up relay connects the motor to -. I initially replaced the up relay with the new one but still had the problem of not moving up. I then replaced the down relay with the new one, and put the old up relay back into place, and everything worked fine. The down relay was the faulty device by not making the - connection to the battery.
customer review - by , August 8, 2021
5/ 5stars
Fixed my CMC jackplate. Old relay would test as good on all contacts but would not carry enough amperage to power the hydraulic actuator. Quick unplug and plug in the new relay.
customer review - by , August 8, 2021
5/ 5stars
Fixed my CMC jackplate. Old relay would test as good on all contacts but would not carry enough amperage to power the hydraulic actuator. Quick unplug and plug in the new relay.
customer review - by , March 3, 2020
5/ 5stars
Works Great, no paper work
customer review - by , February 2, 2020
5/ 5stars
Great replacement. Works well
  »  
  »  
  »  
  »  
  »  

T-H Marine Supplies 7493 Relay, Price/EA

stars Rating 5 | 7 reviews
Brand T-H Marine Supplies
Shop more from LNS
UPC: 739697074932
SKU: LNS-119-7493
Price: $18.68
Quantity:
99 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Price is for EA.

Manufacturer Part Number: 7493

A completely new wire assembly will work with all of the CMC jack plates and trim & tilts that we have been making since 1990.
7493: 12V 80-amp relay has a skirt, has replaced the 7312 relay and will plug into the same socket. Will not plug into the socket that was designed for the 7122.

Description: 12V 80-amp
Replaces: 7312

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Note

This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Customer Reviews
5 out of 5
see all 7 reviews
5 stars
7
4 stars
0
3 stars
0
2 stars
0
1 stars
0
Write a Review
By Overcharged
Date: July 01, 2023
Received products jack plate working great.
Rating: 5 stars [5 of 5 Stars!]
By Bryan O.
Date: August 11, 2022
This relay is the best. I've tried 3 other relays none have been able to withstand powering my 50 amp fan. This one handles it like a champ. I'm using it with a waterproof hella wiring pigtail.
Rating: 5 stars [5 of 5 Stars!]
By Wayne G
Date: April 13, 2022
Was an exact replacement for CMC part 7493. My jackplate was not going up intermittently. I thought the problem was the 2 button switch on the console, but after checking the switch with my voltmeter, decided it was in the relays (part 7493) or possibly the actuator. I discovered something when I installed the new relay. There are 2 relays in the system, an up relay and a down relay, but the electrical current goes through both relays on each operation. On UP the up relay connects to the actuator motor and the down relay connects the motor to -. On DOWN the down relay connects to opposite side of the actuator motor and the up relay connects the motor to -. I initially replaced the up relay with the new one but still had the problem of not moving up. I then replaced the down relay with the new one, and put the old up relay back into place, and everything worked fine. The down relay was the faulty device by not making the - connection to the battery.
Rating: 5 stars [5 of 5 Stars!]
By A.J. Halbardier
Date: August 02, 2021
Fixed my CMC jackplate. Old relay would test as good on all contacts but would not carry enough amperage to power the hydraulic actuator. Quick unplug and plug in the new relay.
Rating: 5 stars [5 of 5 Stars!]
By A.J. Halbardier
Date: August 01, 2021
Fixed my CMC jackplate. Old relay would test as good on all contacts but would not carry enough amperage to power the hydraulic actuator. Quick unplug and plug in the new relay.
Rating: 5 stars [5 of 5 Stars!]
By Mary Kiehn
Date: March 31, 2020
Works Great, no paper work
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 7 reviews
 1  2  [Next]