skip to footer block
MEO Tjernlund 950 0800 460 Volt Single Phase Motor For Head Cooling Fan Series Ca & Br P11312396MEO-10145 https://cdnimages.opentip.com/full/MEO/MEO-10145.jpg Tjernlund 950 0800 460 Volt Single Phase Motor For Head Cooling Fan Series Ca & Br Manufacturer Part Number: 950-0800Part Description: Head Cooling Fan Terminus System Kit Type Vent Terminus System Kit Used On BR-4/CA-6D4/CA-6E4 Head Cooling Fan Voltage Rating 460 Volt AC 1-Phase Speed Rating 1550 RPMFeatures / Benefits Made in USA 11312396 14.4000lbs 0.00 0.00 0.00
Tjernlund
278.9800 2025-07-22 Only 2 left In Stock
customer review - by , March 3, 2024
5/ 5stars
We have an outdoor fireplace and the way the flue was designed there was no up draft. All the smoke would come out the front opening. The flue pipe is on the outside of the wall. The draft inducer is not waterproof, so I had to make a cover for the unit. Now we have an operational fireplace.
customer review - by , July 7, 2023
5/ 5stars
My gas water heater is a crappy Rheem low NOx with motorized damper valve unit that only works well when there is a strong flue draft or when the water heater has been running and the flue is warm. If it were not for a local gas company rebate i would not have gotten this unreliable low NOx version. However, this draft inducer fan makes the gas heater run more reliably and the heater does not fault out and throw error codes as much, and it is about an order of magnitude more reliable than before. This fan did the trick. I used a generous amount of high temp heat duct aluminum foil tape to seal the pipe around and after the fan to make sure exhaust gases are not coming into the house. The fan makes some noise and a little bit of vibration, but it is acceptable and inline with my expectations. I put in a breakbean IR sensor on the motorized damper valve with a relay to only turn on the draft inducer fan when the damper is open. Its been working well for a year now so far.
customer review - by , December 12, 2022
5/ 5stars
The price and the quality
customer review - by , March 3, 2022
5/ 5stars
Works great
customer review - by , March 3, 2022
5/ 5stars
Great Seller and Item, Pleasure doing business with.
customer review - by , February 2, 2022
5/ 5stars
Item desirable! Delivery was remarkably quick. Quality of the wrapping was meritorious. Recommended.
customer review - by , December 12, 2021
5/ 5stars
Bought this unit as backup for a twenty plus year old unit in a woodstove flue pipe. Old unit removed two or three times a year and creosote removed. Motor getting tired and getting hard to restart. Decided to install new unit and move old unit to backup.Old unit installed securely with four corner screws, three side screws, and two top screws. New unit - only four (now much smaller) corner screws. Enlarged four corner holes to work with old unit corner screws. Drilled 5 new holes for three side screws and two top screws. Now installed in place of old unit. Other than mounting holes, new unit seems identical to old, twenty plus year old unit. Now securely installed and running perfectly. Well designed, well constructed unit. Solid Scandinavian (most likely Dansk!). Great device for wood stove with poor natural draft.
customer review - by , November 11, 2021
5/ 5stars
I have a through the wall pipe for my wood stoveWas getting smoke during startup and loadingThe fire was also not burning like it should lazy fire-Solved the smoke problem about 95 percent which is great!-Fires are really easy to light and they continue to flame when the doors shut-Gets the wood stove up to operating temperature within minutes (250 degrees)-Makes starting and maintaining heat much easier for my older dad--less work.If you are having any wood stove problems get one of these--rated at 575 degrees.Used an angle grinder to cut the hole (came with a sticker that adheres to the pipe)I used self tapping screws instead of the ones included.Used Red high heat silicone to seal it (under the side flanges and then on the top and bottom on the outside.Insert the small flange on top--into the stove pipe, then put in the bottom, once flush push the unit up and hold (may need some help) while you get your first screw into place.Bought a 3 foot plug with open wires and wire nutted the like colored wires together (fan and plug)--plug in, the fan is on--unplug the fan, is off--easy.Mounted the fan vertically after the damper and before the elbow (includes examples for locations and wiring differences).So far so good--been running without issue about a week.
customer review - by , June 6, 2021
5/ 5stars
Created a draft on a 4 pipe perfectly...
customer review - by , May 5, 2021
5/ 5stars
Decent price especially with two day delivery. Relatively easy installation. Runs quietly.
  »  
  »  
  »  
  »  
  »  
  »  

Tjernlund 950-0800 460 Volt Single Phase Motor For Head Cooling Fan Series Ca & Br, Price/each

stars Rating 5 | 17 reviews
Brand Tjernlund
Shop more from MEO
SKU: MEO-10145
Price: $278.98
Quantity:
Only 2 left In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Price is for each.

Manufacturer Part Number: 950-0800

Part Description:
  • Head Cooling Fan Terminus System Kit
  • Type Vent Terminus System Kit
  • Used On BR-4/CA-6D4/CA-6E4 Head Cooling Fan
  • Voltage Rating 460 Volt AC 1-Phase
  • Speed Rating 1550 RPM


Features / Benefits

  • Made in USA

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Note

This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Customer Reviews
5 out of 5
see all 17 reviews
5 stars
15
4 stars
2
3 stars
0
2 stars
0
1 stars
0
Write a Review
By A Customer
Date: March 23, 2024
We have an outdoor fireplace and the way the flue was designed there was no up draft. All the smoke would come out the front opening. The flue pipe is on the outside of the wall. The draft inducer is not waterproof, so I had to make a cover for the unit. Now we have an operational fireplace.
Rating: 5 stars [5 of 5 Stars!]
By LJ
Date: July 31, 2023
My gas water heater is a crappy Rheem low NOx with motorized damper valve unit that only works well when there is a strong flue draft or when the water heater has been running and the flue is warm. If it were not for a local gas company rebate i would not have gotten this unreliable low NOx version. However, this draft inducer fan makes the gas heater run more reliably and the heater does not fault out and throw error codes as much, and it is about an order of magnitude more reliable than before. This fan did the trick. I used a generous amount of high temp heat duct aluminum foil tape to seal the pipe around and after the fan to make sure exhaust gases are not coming into the house. The fan makes some noise and a little bit of vibration, but it is acceptable and inline with my expectations. I put in a breakbean IR sensor on the motorized damper valve with a relay to only turn on the draft inducer fan when the damper is open. Its been working well for a year now so far.
Rating: 5 stars [5 of 5 Stars!]
By Maurice
Date: December 25, 2022
The price and the quality
Rating: 5 stars [5 of 5 Stars!]
By Richard Cooper
Date: March 24, 2022
Works great
Rating: 5 stars [5 of 5 Stars!]
By Jorge Gacia
Date: March 02, 2022
Great Seller and Item, Pleasure doing business with.
Rating: 5 stars [5 of 5 Stars!]
By frank
Date: February 11, 2022
Item desirable! Delivery was remarkably quick. Quality of the wrapping was meritorious. Recommended.
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 17 reviews
 1  2  3  [Next]