skip to footer block
MEO Tjernlund DJ 3 Draft Inducer For Oil Or Gas 3" 6" Pipe P7569995MEO-4885 https://cdnimages.opentip.com/full/MEO/MEO-4885.jpg Tjernlund DJ 3 Draft Inducer For Oil Or Gas 3" 6" Pipe Manufacturer Part Number: DJ-3Part Description: In-Line Draft Inducer Type In-Line Draft Inducer Used On Boiler/Furnace, Water Heater, Modular Boiler System, Bakery Oven Overall Dimension 8-1/2 Inch Width x 5-7/8 Inch Depth x 7-1/2 Inch Height Voltage Rating 115 Volt AC at 60 Hertz Current Rating 0.43 Amp Power Rating 35 Watt Speed Rating 1550 RPM Includes Thermal ProtectionFeatures / Benefits In-Line Draft Inducers Assure Positive Draft When Restricted Boilers and Furnaces, Poor Chimneys or Negative Pressures in Buildings Prevent Proper Exhaust of Combustion Gases In-Line Inducers are Built for Long-Lasting, Trouble-Free Service and Available in Sizes and Capacities to Meet Virtually all Heating System Requirements 7569995 080956101013 13.2000lbs 0.00 0.00 0.00
Tjernlund
200.9900 2025-07-19 8 In Stock
customer review - by , July 7, 2023
5/ 5stars
My gas water heater is a crappy Rheem low NOx with motorized damper valve unit that only works well when there is a strong flue draft or when the water heater has been running and the flue is warm. If it were not for a local gas company rebate i would not have gotten this unreliable low NOx version. However, this draft inducer fan makes the gas heater run more reliably and the heater does not fault out and throw error codes as much, and it is about an order of magnitude more reliable than before. This fan did the trick. I used a generous amount of high temp heat duct aluminum foil tape to seal the pipe around and after the fan to make sure exhaust gases are not coming into the house. The fan makes some noise and a little bit of vibration, but it is acceptable and inline with my expectations. I put in a breakbean IR sensor on the motorized damper valve with a relay to only turn on the draft inducer fan when the damper is open. Its been working well for a year now so far.
customer review - by , December 12, 2022
5/ 5stars
The price and the quality
customer review - by , March 3, 2022
5/ 5stars
Works great
customer review - by , March 3, 2022
5/ 5stars
Great Seller and Item, Pleasure doing business with.
customer review - by , February 2, 2022
5/ 5stars
Item desirable! Delivery was remarkably quick. Quality of the wrapping was meritorious. Recommended.
customer review - by , December 12, 2021
5/ 5stars
Bought this unit as backup for a twenty plus year old unit in a woodstove flue pipe. Old unit removed two or three times a year and creosote removed. Motor getting tired and getting hard to restart. Decided to install new unit and move old unit to backup.Old unit installed securely with four corner screws, three side screws, and two top screws. New unit - only four (now much smaller) corner screws. Enlarged four corner holes to work with old unit corner screws. Drilled 5 new holes for three side screws and two top screws. Now installed in place of old unit. Other than mounting holes, new unit seems identical to old, twenty plus year old unit. Now securely installed and running perfectly. Well designed, well constructed unit. Solid Scandinavian (most likely Dansk!). Great device for wood stove with poor natural draft.
customer review - by , November 11, 2021
5/ 5stars
I have a through the wall pipe for my wood stoveWas getting smoke during startup and loadingThe fire was also not burning like it should lazy fire-Solved the smoke problem about 95 percent which is great!-Fires are really easy to light and they continue to flame when the doors shut-Gets the wood stove up to operating temperature within minutes (250 degrees)-Makes starting and maintaining heat much easier for my older dad--less work.If you are having any wood stove problems get one of these--rated at 575 degrees.Used an angle grinder to cut the hole (came with a sticker that adheres to the pipe)I used self tapping screws instead of the ones included.Used Red high heat silicone to seal it (under the side flanges and then on the top and bottom on the outside.Insert the small flange on top--into the stove pipe, then put in the bottom, once flush push the unit up and hold (may need some help) while you get your first screw into place.Bought a 3 foot plug with open wires and wire nutted the like colored wires together (fan and plug)--plug in, the fan is on--unplug the fan, is off--easy.Mounted the fan vertically after the damper and before the elbow (includes examples for locations and wiring differences).So far so good--been running without issue about a week.
customer review - by , June 6, 2021
5/ 5stars
Created a draft on a 4 pipe perfectly...
customer review - by , May 5, 2021
5/ 5stars
Decent price especially with two day delivery. Relatively easy installation. Runs quietly.
customer review - by , February 2, 2021
5/ 5stars
Easy install, first noise level, really recommend
  »  
  »  
  »  
  »  
  »  
  »  

Tjernlund DJ-3 Draft Inducer For Oil Or Gas 3"-6" Pipe, Price/each

stars Rating 5 | 21 reviews
Brand Tjernlund
Shop more from MEO
UPC: 080956101013
SKU: MEO-4885
Price: $200.99
Quantity:
8 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Price is for each.

Manufacturer Part Number: DJ-3

Part Description:
  • In-Line Draft Inducer
  • Type In-Line Draft Inducer
  • Used On Boiler/Furnace, Water Heater, Modular Boiler System, Bakery Oven
  • Overall Dimension 8-1/2 Inch Width x 5-7/8 Inch Depth x 7-1/2 Inch Height
  • Voltage Rating 115 Volt AC at 60 Hertz
  • Current Rating 0.43 Amp
  • Power Rating 35 Watt
  • Speed Rating 1550 RPM
  • Includes Thermal Protection


Features / Benefits

  • In-Line Draft Inducers Assure Positive Draft When Restricted Boilers and Furnaces, Poor Chimneys or Negative Pressures in Buildings Prevent Proper Exhaust of Combustion Gases
  • In-Line Inducers are Built for Long-Lasting, Trouble-Free Service and Available in Sizes and Capacities to Meet Virtually all Heating System Requirements

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Note

This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Look Similar Items By Category

Home & Kitchen > Heating, Cooling & Air Quality > Air Conditioners > Parts & Accessories > Fans
Tools & Home Improvement > Appliances > Air Conditioners & Accessories > Parts & Accessories > Fans
Customer Reviews
5 out of 5
see all 21 reviews
5 stars
17
4 stars
1
3 stars
3
2 stars
0
1 stars
0
Write a Review
By LJ
Date: July 31, 2023
My gas water heater is a crappy Rheem low NOx with motorized damper valve unit that only works well when there is a strong flue draft or when the water heater has been running and the flue is warm. If it were not for a local gas company rebate i would not have gotten this unreliable low NOx version. However, this draft inducer fan makes the gas heater run more reliably and the heater does not fault out and throw error codes as much, and it is about an order of magnitude more reliable than before. This fan did the trick. I used a generous amount of high temp heat duct aluminum foil tape to seal the pipe around and after the fan to make sure exhaust gases are not coming into the house. The fan makes some noise and a little bit of vibration, but it is acceptable and inline with my expectations. I put in a breakbean IR sensor on the motorized damper valve with a relay to only turn on the draft inducer fan when the damper is open. Its been working well for a year now so far.
Rating: 5 stars [5 of 5 Stars!]
By Maurice
Date: December 25, 2022
The price and the quality
Rating: 5 stars [5 of 5 Stars!]
By Richard Cooper
Date: March 24, 2022
Works great
Rating: 5 stars [5 of 5 Stars!]
By Jorge Gacia
Date: March 02, 2022
Great Seller and Item, Pleasure doing business with.
Rating: 5 stars [5 of 5 Stars!]
By frank
Date: February 11, 2022
Item desirable! Delivery was remarkably quick. Quality of the wrapping was meritorious. Recommended.
Rating: 5 stars [5 of 5 Stars!]
By Donna L.A.
Date: December 05, 2021
Bought this unit as backup for a twenty plus year old unit in a woodstove flue pipe. Old unit removed two or three times a year and creosote removed. Motor getting tired and getting hard to restart. Decided to install new unit and move old unit to backup.Old unit installed securely with four corner screws, three side screws, and two top screws. New unit - only four (now much smaller) corner screws. Enlarged four corner holes to work with old unit corner screws. Drilled 5 new holes for three side screws and two top screws. Now installed in place of old unit. Other than mounting holes, new unit seems identical to old, twenty plus year old unit. Now securely installed and running perfectly. Well designed, well constructed unit. Solid Scandinavian (most likely Dansk!). Great device for wood stove with poor natural draft.
Rating: 5 stars [5 of 5 Stars!]
Items 1 - 6 of 21 reviews
 1  2  3  4  [Next]