0 reviews
Be the first to review this item!
Product Description
Manufacturer Part Number: 05073681001
Push the screw gripper onto the tip of the screwdriver until the end of the blade protrudes from the rubber blade holder.
Attach the screw to the tip of the blade and secure it in the screw gripper.
Pull the screw gripper towards the screwdriver handle until the two arms of the gripper sit against the head of the screw and are spread slightly apart. The Wera screw gripper releases the screw automatically after it has been fastened.
The two gripper arms spread further apart as they are pushed against the surface and automatically snap back when the head of the screw is countersunk.
When fastening screws in blind holes the screw gripper is pushed back, making it possible to reach even deep-seated screws.
The screw gripper attachment can also be used with L-keys and long bits!
Article Description
Screw gripper: attachment tool with holding function for screws. Holds all screw profiles securely on the tool. During the job, the gripper can be pushed up along the blade so that it is not in the way when working with low-lying screws.
- Attachment tool with holding function for screws
- Holds all screw profiles and sizes securely on the tool
- Suitable for round and hexagonal blades with a diameter of 4.5 mm to 6.0 mm
Push the screw gripper onto the tip of the screwdriver until the end of the blade protrudes from the rubber blade holder.
Attach the screw to the tip of the blade and secure it in the screw gripper.
Pull the screw gripper towards the screwdriver handle until the two arms of the gripper sit against the head of the screw and are spread slightly apart. The Wera screw gripper releases the screw automatically after it has been fastened.
The two gripper arms spread further apart as they are pushed against the surface and automatically snap back when the head of the screw is countersunk.
When fastening screws in blind holes the screw gripper is pushed back, making it possible to reach even deep-seated screws.
The screw gripper attachment can also be used with L-keys and long bits!
Article Description
Screw gripper: attachment tool with holding function for screws. Holds all screw profiles securely on the tool. During the job, the gripper can be pushed up along the blade so that it is not in the way when working with low-lying screws.
 |  | Remember | ||
|---|---|---|---|---|
| Code | mm | mm | ||
| 05073681001 | 4.5 - 6.0 | 41.0 | ||
Attention CA Residents: Prop 65 Warning
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
Need more information?
Our staff are available to answer any questions you may have about this item
Our staff are available to answer any questions you may have about this item