I ordered 2 of these for our bedroom. I was limited on space, and wanted a cabinet for storage and a drawer on top. Surprisingly hard to find something simple like this that would work for what I had in mind. I had read othe reviews, so I was hesitant to spend even $50-$60 on these. However - I think they are great for the price. One of them came with a touch-up that looks like it was done at the factory (smudged paint covered by a slightly different shade of white). However, it's on the side...and I don't really care - they were cheap! At some point, I might go over them with $3 worth of white spray paint, though.I'm 8 months pregnant and I put both of them together in less than an hour. The instructions were hiding in the hardware box - that is the only thing that had me stumped for a minute. All the pieces were there, and they even come with white wood plugs to cover up the screw holes on the unit. (Cheap Target or Ikea furniture doesn't even do that). The drawer seems more sturdy than the bottom shelf. It's very thin, and I think I'll have to reinforce it before I put books or anything heavy inside the cabinet. Overall, I think I got what I paid for... and what I was looking for. A quick, inexpensive, and not too shabby solution to having NO night stands.

These nightstands are 18" in depth (not width), which was unfortunate. The sides and bottom are also made of cheap veneer. That said, for the price, these are still a good deal. Assembly was easy and the front, drawer and top are actually wood. The stain is something between a cherry and a walnut. The door only opens one way and there's not a good was to hang it to open the other way. They look great in the bedroom and fit in well with the rubberwood bed. Can't complain though because they look just as good as similar nightstands for 2-3x the price and they are super functional and pretty.

It feels somewhat cheap. What can you expect for $45 bucks. With that being said, my daughter loves it, so that is what counts anyway! I just wish the build quality was a little better.

You do get what you pay for with this nightstand.The color is way off. It's light brown and patchy. Mine also arrived scratched up. Not a big deal though, it could always be painted or stained. Only the frame and the doors are wood, the sides are a very thin mdf(almost like a thin plastic). Instructions are absolutely useless, but it's not a big deal,assembly is easy to figure out on your own. Overall, it's not bad for the price. I've ordered $400 pieces that were just as bad, to be honest.

The table was east to put together however, not the most sturdy. Its fine for putting things in it but I would't sit on it & expect it to hold (don't know why anyone would do that anyway). They look good, exactly how they look in the picture. Defiantly look more expensive than what they are worth. Basically, don't expect a super sturdy piece but they look good for the price.

pretty solid little bedside table for the priceassembly instructions should be more detailedmake note that door is not reversible-only opens from left

This is not a very elegant product, but it served it's purpose for my interim night stand and it was easy to assemble. It is well worth the cost.

This table assembles pretty easily and has a reasonably sturdy base. My husband assembled the first one and panicked at first because the side pieces are quite flimsy. Fully assembled though, the piece does feel sturdy. This is not solid wood, and the price reflects that. After shopping around for bedroom tables this one stood out for its modern look with a bargain price. All in, I'd recommend this piece.

This nightstand came exactly as described. It was easy to assemble and has a nice finish to it. You can't go wrong for the price you pay for it. It's really nice. I needed a nightstand for my side of the bed and needed it to match my existing "espresso" finish. I finally found this one and it matches perfectly! Even the knobs that came with it are nice. It's not TOP quality, but it's a great, useful piece of furniture with a nice look.

The product arrived as advertised, only it was black instead of walnut. However, black worked, so I kept it.

If you're used to assembling press board furniture, this will be difficult. Press board furniture uses mainly those cam attachments that have some huge tolerance for assembly but then can ratchet down. This is assembled with real wood with wood screws, 1/16" off of placement of those screw holes is noticeable. The trick is to hold the wood tightly together while putting in the screws (or else part A will be separate from part B when you run out of threads), and don't crank them down completely at first. You have to put them in lightly, and tighten them by 1/4 turns on each screw. Sometimes you'll have to back a few out a couple turns, jostle the parts, and try again. Get the screws all the way in or the wood bits that hide the screw heads won't fit.In the end it turned out well, though the drawer is still a bit cockeyed. It's a dark color though, so it's hard to see. It looks rather smart, I have my humidor sitting on it in my living room.

This product is very easy to assemble and looks nice, however, I recieved a wrong part so the drawer could not be put together fully. Other than that, it's awesome and the manufacturer is sending the correct part, quick response.

A bad piece of furniture? For under $50 what do you expect? Bad finish on what is a little better then scrap wood. Some of the screw holes didn't line up strait. But it is the right size and sturdy and does what I've asked of it, holding a piece of equipment I have nowhere else to place. gives a bit of storage, too. I went to Goodwill they had one same size, no door, broken draw, old and beat up, needed paint or something, they wanted $30. I Knew this wasn't going to be a good piece but it is much better then Goodwill's.All assembly required. Need a screw driver (phillips) maybe glue (I didn't use it) and half hour to 45 minutes.

I received the furniture in excellent shape and ahead of schedule.I was given a Fed Ex tracking number, but it was either changed or the incorrectly assigned. I sat and wondered if my item would ever get shipped, per the tacking number provided, it indicated that it never left the Visiondecor warehouse. The item arrived one day ahead of schedule although Fed Ex indicated it as never picked up. I checked the actually tracking number on the box, which of course, was different from the one I was provided via email.If someone from Visiondecor reads this email, it something you may want to look into. It's always nice to keep the customer updated on tracking numbers, if it is changed or incorrectly assigned. Customer service is very important!!

After receiving and assembling this product, and then seeing the very low reviews, I thought I would weigh in with my two cents.Assembly was quick, and it only took me about thirty minutes to put together two. I agree with what most others have said about a less than concise instruction manual, but if you take your time and think it through its not that hard (It is only instant build furniture not open heart surgery). For the price I am fairly satisfied with the aesthetic quality, and although there were a few imperfections in the stain they were all located on the rear. I don't see anything wrong with the structural integrity and overall it seems very sturdy.Bottom line is, for [...] this will rival anything in the same price range. If you are going to buy this item go into it knowing you are sacrificing a little quality to save a lot of money.

I purchased these accent tables for my son and new daughter-in-law. They live across the country so I have never actually seen the tables myself. They are happy witht them, so I will give a good review. They shipped fast and arrived on-time and in good shape. These tables may not be top of the line, solid wood furniture, but my kids like them and they serve a purpose. They are satisfied with them, so I am satisfied with my purchase.

This table was quick to put together and looks great in my office. The brushed silver colored knobs go well with my other white and silver furniture. I use it as a printer stand, the top drawer is used to hold paper. The sliding of the drawer would be better if there were some kind of metal on it, but it is just carved out so it's not the smoothest slide.

This item is a bit smaller, but it does what I wanted it to do.

Just what I expected. Nice finish, lightweight, easy to assemble. Fits exactly into space I had.Price was good, delivery fast. Very pleased.

The nightstand is really sturdy and provides a good storage space. The drawer is sturdy, too, but doesn't pull straight out (kind of slips down).The side panels aren't real wood - they're more of a printed high-density cardboard. Their color appears a bit greener than the rest of the hardwood, but you can't really tell when it's all assembled. I'd recommend it.