Here is an ingenious answer to a common problem.I store most of my funnels in the garage. After all, that's where I use them. It's a detached garage and, quite frankly, it can get dusty out there. If you're doing any woodworking or sweeping, it can even get dustier. So, I began putting my funnels in large plastic bags to keep them clean, or stuffing paper towels in the end to keep dust out, because you do not want dust and dirt collecting in fuel tanks.The bag idea worked, but honestly, as good of an idea as it was, it was a bit of a hassle.So, what could be better than a funnel that has a cap on each end to keep the dust and debris out? No more cleaning dirty funnels before using them. Better still, they have a little handle which I used to hang the funnel from a rafter hook.It's a simple idea, but a very effective one. And you don't find many of those kinds of ideas in today's world. So, make your life a little easier and simpler and get one of these funnels.

keeps dirt and crud outside, not inside of it. i have used these for years in oilfield, well worth the money, oil will collect inside of funnel so watch when you open bottom cap

I happen to have a vehicle that burns oil, so I carry a quart and a funnel. This funnel, with the top and bottom screw-on covers means I don't have to deal with residual oil. Perfect.

Easy to install and sealable

Works Great

Allows for much easier pouring of oil in a truck where the filler is a long reach. The covers keep the inside clean.

Having caps on both ends keeps dust and dirt from getting in the funnel. This is the straight neck version. I'd rather have the small funnel in the flex spout but this one does what it's supposed to do

Pretty much fits every model car, no spills.

I bought this funnel for pouring 5-gallon heating fuel cans into my 275-gallon heating fuel tank if i happen to run out in the coldest biggest snow storm of our winter and the fuel trucks cant make it here. I have a 2 locking flip up cap on my fuel tank and the inside diameter is the same size a the widest section of this funnel, a snug 2. I simply cut off the small diameter lower part of the funnel. I set the funnel into the opening in the locking cap and it is firm and doesn't move or wiggle at all. The very top part of the funnel is shaped so the fuel doesn't splash out. I should have bought 2 and left the 2nd one like it was when it got here, it looked like it would work great for pouring gas into your car or truck. This might just make a great Xmas gift for your friends in Minnesota or Alaska. It is cheap and very useful.

Finally a heavy duty, thick, rugged, wide funnel. I ordered several others and they're all going in the trash. Relieved to have found this. Like my magnet trick?

Sealed at both ends to keep it clean - very good funnel.

Great to do business with. Thank you

Great Buy.

Works great.

The caps on both ends of the funnel help keep it clean so you don't have to worry about dirt getting into your oil or gas tank. Plus, even though they cost a bit more now than they did when I bought my first one, they are still less expensive than other funnels I saw in the store that were not what I wanted. The one I already had before these (same style, same brand), is several years old, and still in great shape.

Great funnel for the price !

I've got a water treatment system that requires me to add 50 lb of calcite to the neutralizer tank every couple of years or so. It all has to go through a small 1.5 hole in the side of the tank. This funnel works perfectly for this, turning what used to be a crunched solo cup nightmare into an easy pour operation. Very well made too, none of those annoying plastic burrs you always have to shave off of most plastic funnels.

I like that it has caps on both ends. It will fit into anything. No need for more funnels.

It works