skip to footer block
NTP Barker 26835 Bobber Gauge Tank Indicat P12846845NTP-B6C26835 https://cdnimages.opentip.com/full/NTP/NTP-B6C26835.jpg Barker 26835 Bobber Gauge Tank Indicat Manufacturer Part Number: 26835Portable Waste Holding Tank Fill Level Indicator; Fits 3/4 Inch Male Garden Hose Opening; Bobber GaugeProduct InfoThe Tote-Along Bobber Gauge alerts you before over filling. It eliminates potential spills and accompanying mess. The Indicator installs in seconds and attaches to any 3/4 Inch male garden hose opening. The red tipped - obber- provides a visual signal when your tank is almost full.Catalog Page: NTP - 14-35Compatibility: 3/4 Inch Male Garden Hose OpeningType: Bobber GaugeFeatures Alerts Before Over Filling Eliminates Potential Spills And Accompanying Mess Red Tipped \"Bobber\" Provides A Visual Signal When Your Tank Is Almost Full Easily Installs On Any Portable Holding Tank Limited 1 Year Warranty Product SizeProduct Height(inch): 1.5Product Length(inch): 6.5Product Width(inch): 3.5Product Weight(lbs): 0.1 12846845 755220268357 0.1200lbs 0.00 0.00 0.00
Barker
12.1000 2025-11-01 Out of Stock
customer review - by , August 8, 2023
5/ 5stars
A little expensive for what you get. But very useful.You have to watch it very closely.Putting it on only moderately tight so as to allow air to escape while filling.Once taken off it falls into 4 pieces that can be easily lost.I'm thinking about gluing the top and bottom clear plastic pieces together.I store mine in a large prescription bottle to protect it.
customer review - by , August 8, 2023
5/ 5stars
Somehow lost the original one that came with the tank so I had to buy a replacement and it fits perfectly!
customer review - by , July 7, 2023
5/ 5stars
Worth money
customer review - by , May 5, 2023
5/ 5stars
There should be 2 hose fittings, 1 for the vent and one for the bobber. The bobber becomes 3 pieces when removed, the 3 pieces should be captured to each other AND tethered to the tank. As for the vent, toss the screw-on cap and get a hose-end shutoff valve, much faster, no need to worry about the tether, etc. I bought the tank that will hold my waste with room to spare, so I don't need the bobber. Now, for the 'upgraded' wheels: the fact that the tires are pneumatic is not relevant for such a small wheel. The chinese rubber wont hold air, I slimed all 4 and NONE would hold air. And who wants to carry a compressor or fire it up at a campground? Until recently, they came with solid wheels. I''m giving 5 stars because I called them up with my tire issue, and they sent me a complete set of the 'old style' plastic wheels at no charge!
customer review - by , February 2, 2023
5/ 5stars
This product worked well. It's good to know when it's getting close to full, nothing worse than an over filled crap tank!
customer review - by , December 12, 2022
4/ 5stars
Helped prevent overfilling but must be removed to vent when tank is emptied, I think it's a little overpriced.
customer review - by , August 8, 2022
5/ 5stars
It popped right on
customer review - by , July 7, 2022
5/ 5stars
Lost my old one, this was an exact match.
customer review - by , June 6, 2022
5/ 5stars
Quick delivery. Fits on tank perfectly. Easy to install
customer review - by , March 3, 2022
5/ 5stars
This product is like the original great quality and easy to use
  »  
  »  
  »  
  »  

Barker 26835 Bobber Gauge Tank Indicat

stars Rating 5 | 17 reviews
Brand Barker
Shop more from NTP
UPC: 755220268357
SKU: NTP-B6C26835
Price: $12.10
Quantity:
Out of Stock
*  Click "Add to Shopping List" to save the item for later purchase. You can receive a notice email when it is back in stock.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Manufacturer Part Number: 26835

Portable Waste Holding Tank Fill Level Indicator; Fits 3/4 Inch Male Garden Hose Opening; Bobber Gauge

Product Info
The Tote-Along Bobber Gauge alerts you before over filling. It eliminates potential spills and accompanying mess. The Indicator installs in seconds and attaches to any 3/4 Inch male garden hose opening. The red tipped - obber- provides a visual signal when your tank is almost full.

Catalog Page: NTP - 14-35

Compatibility: 3/4 Inch Male Garden Hose Opening

Type: Bobber Gauge

Features
  • Alerts Before Over Filling
  • Eliminates Potential Spills And Accompanying Mess
  • Red Tipped "Bobber" Provides A Visual Signal When Your Tank Is Almost Full
  • Easily Installs On Any Portable Holding Tank
  • Limited 1 Year Warranty


Product Size
Product Height(inch): 1.5
Product Length(inch): 6.5
Product Width(inch): 3.5
Product Weight(lbs): 0.1

warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

Note

This product is not eligible for coupon code discount, for we've been offering the best price in the market.
Need more information?
Our staff are available to answer any questions you may have about this item
Request More Information

Look Similar Items By Category

Electronics > Car & Vehicle Electronics > Car Electronics
Automotive > Car Electronics & Accessories > Car Electronics
Customer Reviews
5 out of 5
see all 17 reviews
5 stars
15
4 stars
2
3 stars
0
2 stars
0
1 stars
0
Write a Review
By sharon pohlman
Date: August 20, 2023
A little expensive for what you get. But very useful.You have to watch it very closely.Putting it on only moderately tight so as to allow air to escape while filling.Once taken off it falls into 4 pieces that can be easily lost.I'm thinking about gluing the top and bottom clear plastic pieces together.I store mine in a large prescription bottle to protect it.
Rating: 5 stars [5 of 5 Stars!]
By Jesse
Date: August 09, 2023
Somehow lost the original one that came with the tank so I had to buy a replacement and it fits perfectly!
Rating: 5 stars [5 of 5 Stars!]
By Dana R Smith
Date: July 14, 2023
Worth money
Rating: 5 stars [5 of 5 Stars!]
By Philip G.
Date: May 25, 2023
There should be 2 hose fittings, 1 for the vent and one for the bobber. The bobber becomes 3 pieces when removed, the 3 pieces should be captured to each other AND tethered to the tank. As for the vent, toss the screw-on cap and get a hose-end shutoff valve, much faster, no need to worry about the tether, etc. I bought the tank that will hold my waste with room to spare, so I don't need the bobber. Now, for the 'upgraded' wheels: the fact that the tires are pneumatic is not relevant for such a small wheel. The chinese rubber wont hold air, I slimed all 4 and NONE would hold air. And who wants to carry a compressor or fire it up at a campground? Until recently, they came with solid wheels. I''m giving 5 stars because I called them up with my tire issue, and they sent me a complete set of the 'old style' plastic wheels at no charge!
Rating: 5 stars [5 of 5 Stars!]
By Skye
Date: February 19, 2023
This product worked well. It's good to know when it's getting close to full, nothing worse than an over filled crap tank!
Rating: 5 stars [5 of 5 Stars!]
By M Rebok
Date: December 20, 2022
Helped prevent overfilling but must be removed to vent when tank is emptied, I think it's a little overpriced.
Rating: 4 stars [4 of 5 Stars!]
Items 1 - 6 of 17 reviews
 1  2  3  [Next]