skip to footer block
DRA Qualtech DWT64115 1/16 27 NPS HSS 4 Flute Straight Pipe Tap P13388402DRA-DWT64116 https://cdnimages.opentip.com/full/DRA/DRA-DWT64116.jpg Qualtech DWT64115 1/16 27 NPS HSS 4 Flute Straight Pipe Tap Manufacturer Part Number: dwt64116National Pipe Straight Taps marked NPS are suitable for tapping holes our couplings for low pressure work to assemble with taper threaded pipe or fittings to secure a tight jpint when a sealer is usedThey are suitable for NPSC and NPSM workUsed to make new threads or re-thread damaged and/or jammed threadsSize :1/8\"-27Material :High Speed SteelFinish :Uncoated (Bright)Style :NPSCutting Direction :Right HandFlute Type :533002Tap Size :1/8\"Threads Per Inch :27 13388402 887861076081 0.3000lbs 0.00 0.00 0.00
Qualtech
9.58 2025-07-23 259 In Stock
customer review - by , February 2, 2024
5/ 5stars
I used this tap along with a 47/64 drill when turning some 1 PVC rod on my lathe to create a PVC adapter.I turned the PVC down and glued it into a piece of 1 electrical PVC conduit then drilled/tapped the insert for 1/2 NPS thus allowing me to install a 1/2 gland nut into a 1 LR PVC conduit body for my StarLink satellite system.Needless to say, the tap works perfectly with 1/2 electrical fittings.
customer review - by , February 2, 2024
5/ 5stars
This tap is the exact tap for a Mercruiser Alpha/MR/Alpha Gen II bell cap shift cable thread
customer review - by , February 2, 2024
5/ 5stars
I bought this specialty tap to clean out and chase the threads on my brass Champion pop-up sprinkler heads. I wire wheel the body,stem, and brass insert to clean them up. Install a new insert o'ring and rubber stem seal so they don't leak. Rebuilt!
customer review - by , June 6, 2023
5/ 5stars
Great
customer review - by , November 11, 2022
5/ 5stars
Order Received! Great Product. Great Seller... Fast DeliveryPerfect addition to small shop
customer review - by , September 9, 2022
5/ 5stars
Nothing to dislike. Good quality and good price
customer review - by , June 6, 2022
5/ 5stars
Great quality 4 fluke tap. Arrived on time. Came in a nice reusable plastic tube.
customer review - by , February 2, 2022
5/ 5stars
There are different types of taps. There is no standard tap although the Tapered Tap is what you see at the orange and blue stores. This is a tap for flat bottom holes so you can get threads cut to nearly the bottom of the hole. If you can't get it started in your hole, you begin with a tapered tap and then switch to this. This flat bottom tap works fine for through holes too. I used an 11/32 size hole for aluminum and 21/64 for soft PVC board. YMMV.This tap is well built and I am glad to have one made in USA.
customer review - by , February 2, 2021
5/ 5stars
The Tap arrived quickly with no issues. I make many home-made lamps as a hobby and for resale. This is a must have item for custom lamp maker's arsenal of tools. The tap is of good quality. No issues tapping brass or aluminum.
customer review - by , February 2, 2021
5/ 5stars
Worked as expected. Cut new threads in a broken aluminum lamp.

Qualtech DWT64116 1/8-27 NPS HSS 4 Flute Straight Pipe Tap

stars Rating 5 | 10 reviews
Brand Qualtech
Shop more from DRA

UPC: 887861076081
SKU: DRA-P-122
Price:
$9.58Free shipping on orders over $350 on select DRA- items. Details
Size:
Quantity:
259 In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with DRA-, and you can get free shipping for an order of over  $350.00  consisting of only DRA- series products.

Product Description

Manufacturer Part Number: dwt64116

  • National Pipe Straight Taps marked NPS are suitable for tapping holes our couplings for low pressure work to assemble with taper threaded pipe or fittings to secure a tight jpint when a sealer is used
  • They are suitable for NPSC and NPSM work
  • Used to make new threads or re-thread damaged and/or jammed threads


  • warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
    Need more information?
    Our staff are available to answer any questions you may have about this item


    Look Similar Items By Category


    Customer Reviews
    5 stars
    10
    4 stars
    0
    3 stars
    0
    2 stars
    0
    1 stars
    0
    By Weaver Cattle Company
    Date: February 16, 2024
    I used this tap along with a 47/64 drill when turning some 1 PVC rod on my lathe to create a PVC adapter.I turned the PVC down and glued it into a piece of 1 electrical PVC conduit then drilled/tapped the insert for 1/2 NPS thus allowing me to install a 1/2 gland nut into a 1 LR PVC conduit body for my StarLink satellite system.Needless to say, the tap works perfectly with 1/2 electrical fittings.
    Rating: 5 stars [5 of 5 Stars!]
    By A Customer
    Date: February 12, 2024
    This tap is the exact tap for a Mercruiser Alpha/MR/Alpha Gen II bell cap shift cable thread
    Rating: 5 stars [5 of 5 Stars!]
    By Chuck Honnold
    Date: February 05, 2024
    I bought this specialty tap to clean out and chase the threads on my brass Champion pop-up sprinkler heads. I wire wheel the body,stem, and brass insert to clean them up. Install a new insert o'ring and rubber stem seal so they don't leak. Rebuilt!
    Rating: 5 stars [5 of 5 Stars!]
    By Larry Lynch
    Date: June 12, 2023
    Great
    Rating: 5 stars [5 of 5 Stars!]
    By RAJ
    Date: November 14, 2022
    Order Received! Great Product. Great Seller... Fast DeliveryPerfect addition to small shop
    Rating: 5 stars [5 of 5 Stars!]
    By A Customer
    Date: September 11, 2022
    Nothing to dislike. Good quality and good price
    Rating: 5 stars [5 of 5 Stars!]
    Items 1 - 6 of 10 reviews
     1  2  [Next]