DRA Qualtech DWTMHX1.6X.35 m1.6 X .35 Carbon Steel Hex Die P13389062DRA-DWTMHX1-6X-35 https://cdnimages.opentip.com/full/DRA/DRA-DWTMHX1-6X-35.jpg Qualtech DWTMHX1.6X.35 m1.6 X .35 Carbon Steel Hex Die Manufacturer Part Number: dwtmhx1.6x.35For re-threading \"\"or cleaning\"\" bruised or rusty threadsIdeal for maintenanceCarbon steel hex shaped dieSize :m1.6 x .35Material :Carbon SteelFinish :Uncoated (Bright)Style :Hex DieCutting Direction :Right Hand 13389062 887861104999 1.0000lbs 0.00 0.00 0.00

Qualtech

7.36 2025-07-23 13 In Stock Qualtech DWTMHX1.6X.35 m1.6 X .35 Carbon Steel Hex Die

customer review - by KY Mel, July 7, 2023

5/ 5stars

Works very well.

customer review - by Madcamper, July 7, 2023

5/ 5stars

I have an 8ft bush hog I use for shredding thick brush and small trees. The cotter key that held the nut in must have snapped off allowing the washer to wiggle loose and over time buggered up the threads on the gear shaft rendering putting a new washer on, not possible. This die saved me tons of time and effort unbolting and hauling in the gear box to the supplier for a fix. Got the die on and slowly and carefully threaded it down onto the shaft creating new threads. Now my blades and stump jumper are back installed like new!

customer review - by David Markman, June 6, 2023

5/ 5stars

I used this to clean up some existing threads that were bent and rusted. With a lot of tap oil this worked like a charm. I don't know if it is hard enough to make new threads, but it was sold to clean threads and it worked. I used a C-lamp as a wrench to hold it in place and turn it. I didn't have a crescent or box and open end wrench large enough for it.

customer review - by MDGB, May 5, 2023

5/ 5stars

Excellent

customer review - by t wayman, May 5, 2023

5/ 5stars

Very good for cleaning messed up axle threads. Needs a big 1 5/8 socket to fit over it though

customer review - by Bill, May 5, 2023

5/ 5stars

Worked great.

customer review - by trailrunner, May 5, 2023

5/ 5stars

works perfectly. I simply could not find a thread die in 11 x 1.25 for my motorcycle shocks. cut the threads very nicely.

customer review - by Robert Olbrich, May 5, 2023

5/ 5stars

Works good

customer review - by EJ Honda, April 4, 2023

5/ 5stars

This die works and fits as expected, so I'm scratching my head why the Drill America tap that I bought with this doesn't seem to fit well on my tests. Oh well, that's for a review of that specific item. In the meantime, this item fits and works well.

customer review - by Willie Blues, April 4, 2023

5/ 5stars

I recommend this die! It seems to be good quality. Cleaned up and fixed some fairly bruised threads on a drive shaft flange connection (M18 x 1.5). I was concerned as the bad threads were near the end where I needed to start the die. And these are hard steel threads on a drive shaft. The die is chamfered so it's easy to start in/on bad threads.

Qualtech DWTMHX1.6X.35 m1.6 X .35 Carbon Steel Hex Die

Rating 5 | 120 reviews

Brand Qualtech

Shop more from DRA

UPC: 887861104999

SKU: DRA-P-333

Price:

$7.36Free shipping on orders over $350 on select DRA- items. Details

Size:

Quantity:

13 In Stock

M1.6 X .35	- + Stock: 13 $7.36
M1.8 X .35	- + Stock: 13 $8.83
M10 X 1.25	- + Stock: 312 $11.39
M10 X 1.5	- + Stock: 1104 $11.39
M12 X 1.25	- + Stock: 460 $12.34
M12 X 1.75	- + Stock: 359 $12.34
M14 X 1.25	- + Stock: 91 $13.05
M14 X 1.5	- + Stock: 2939 $13.05
M14 X 2	- + Stock: 628 $13.05
M16 X 1.5	- + Stock: 1310 $14.94
M16 X 2	- + Stock: 1019 $14.94
M18 X 1.5	- + Stock: 168 $19.42
M18 X 2.5	- + Stock: 67 $19.42
M2 X .40	- + Stock: 55 $8.83
M2.2 X .45	- + Stock: 43 $8.83
M2.5 X .45	- + Stock: 63 $8.83
M20 X 1.5	- + Stock: 887 $24.62
M20 X 2.5	- + Stock: 476 $24.62
M22 X 1.5	- + Stock: 207 $30.02
M22 X 2.5	- + Stock: 80 $30.02
M24 X 3	- + Stock: 50 $31.62
M27 X 2	- + Stock: 105 $35.19
M27 X 3	- + Stock: 67 $35.19
M3 X .5	- + Stock: 228 $8.22
M3.5 X .6	- + Stock: 97 $8.22
M30 X 2	- + Stock: 146 $42.57
M30 X 3.5	- + Stock: 205 $42.57
M33 X 2	- + Stock: 36 $46.85
M33 X 3.5	- + Stock: 23 $46.85
M36 X 3	- + Stock: 101 $51.60
M36 X 4	- + Stock: 23 $51.60
M39 X 3	- + Stock: 13 $54.16
M39 X 4	- + Stock: 40 $56.77
M4 X .7	- + Stock: 162 $8.22
M4.5 X .75	- + Stock: 83 $8.22
M5 X .8	- + Stock: 104 $8.22
M6 X 1	- + Stock: 1239 $8.62
M7 X 1	- + Stock: 116 $9.23
M8 X 1	- + Stock: 623 $9.23
M8 X 1.25	- + Stock: 590 $9.23

Qty
Price

* Click "Add to Cart" to calculate shipping and delivery time.

Share & Earn 10% Cash Back Best Price in Bulk

Best Price in Bulk!

Because we are a major distributor for some products, we price very aggressively by sacrificing profit margin whenever we sell in bulk. The philosophy to offer quality products with little mark up has created unmatched customer loyalty for some successful membership based stores. Unlike those wholesale to public membership clubs, we do not charge any membership fee. Some merchants offer FREE shipping, but when you buy quantity 10, you pay 10 times total. Essentially, you are paying 10 times on shipping. We don't think that is fair to you. Why? Most of the time, shipping a 10 lb parcel does not cost 10 times of a 1 lb parcel.

Here is an example:

Opentip	Others
Product Price: $8	Product Price: $20
Shipping for quantity 1: $12	Shipping: FREE
Quantity: 10	Quantity: 10
Total Shipping for quantity 10: $18	Total Shipping: FREE
Subtotal: $98 Saving: $102 (51%)	Subtotal: $200

Don't be shy. If you discover any competitor outselling us in a particular product, whenever you purchase in large quantity, please bring it to our attention. Most of the time, we will match or beat their price, and give you a credit. If we lose to a competitor, it is our shame. We then know we need to work harder in sourcing to create values for you.

* Price comparison must be based on comparable brands or models and in bulk quantity purchase.

Optional related products

Qualtech DWTMHX24X2 m24 X 2 Carbon Steel Hex Die

$22.82

Qualtech DWTSMH3X.6 m3 X .6 Carbon Steel Hex Die

$8.00

Qualtech DWTBSW7/16-14HEX 7/16"-14 Carbon Steel British Standard...

$15.72

Qualtech DWTBSW9/16-12HEX 9/16"-12 Carbon Steel British Standard...

$18.11

Qualtech DWTSH1-1/8-8 1-1/8-8 UNS Carbon Steel Hex Die 8 Pitch

$23.97

Qualtech DWTHSHEX1420 1/4-20 UNC HSS Hex Die

$9.88

Qualtech DWTHX1420LH 1/4-20 UNC Carbon Steel Left Hex Die

123

$6.58

Qualtech DWTHX440 #4-40 UNC Carbon Steel Hex Rethreading Die

103

$4.11

Qualtech Dwtsh2-1/4-18 2-1/4-18 UNS Carbon Steel Hex Die

$72.62

Qualtech DWTSH1-1/16-12 1-1/16-12 UNS Carbon Steel Hex Die

$29.88

Qualtech DWTHXNPT18 1/8-27 NPT Carbon Steel Hex Pipe Die

$5.52

Field Tool Die Hrcs M 2.0 X 0.45, Rh Cs Hex Rethd Die

$2.50

Field Tool Die Hrcs M 3.0 X 0.50, Rh Cs Hex Rethd Die

$1.73

Field Tool Die Srcs 1/4-20; 2 1/2 X 1/2, Rh Cs Square Bolt Die

$14.18

Pricing Note

Free Shipping Promotion: Buy more items from the same series, product code beginning with DRA-, and you can get free shipping for an order of over $350.00 consisting of only DRA- series products.

Product Description

Manufacturer Part Number: dwtmhx1.6x.35

For re-threading ""or cleaning"" bruised or rusty threads

Ideal for maintenance

Carbon steel hex shaped die

Size

m1.6 x .35

Material

Carbon Steel

Finish

Uncoated (Bright)

Style

Hex Die

Cutting Direction

Right Hand

Attention CA Residents: Prop 65 Warning

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

You may also like