skip to footer block
EAT Cta CM2064 Thin Wall Oxygen Sensor Socket P6227249EAT-CM2064 https://cdnimages.opentip.com/full/EAT/EAT-CM2064.jpg Cta CM2064 Thin Wall Oxygen Sensor Socket Manufacturer Part Number: CM2064Combination 1/2-Inch Square Drive and 1-Inch Hex DriveCta manufacturing 2064 thin wall oxygen sensor socket removes and installs 22mm oxygen sensors that cannot be accessed with standard sockets. 1/2-inch square drive and 1-inch external hex drive. Oal - 3.5-inch / 90mm. 6227249 053001020645 0.4500lbs 1.20 1.80 6.10
CTA
14.2700 2025-07-17 Only 2 left In Stock
customer review - by , May 5, 2024
5/ 5stars
Great for reaching the top banks of o2 sensors in Korean cars. Most sockets are to wide to fit in the narrow diameter for my 2011 Optima or 2015 Santa Fe. The thin sidewalls work great for the job.
customer review - by , April 4, 2024
5/ 5stars
My 2006 Highlander L4 2.4 engine oxygen sensor has a metal collar around the hex nut. Regular socket wall is too thick and won't push through. This thin-wall socket perfectly fits the Denso P/N 234-9054 oxygen sensor. Strongly recommend!!
customer review - by , February 2, 2024
5/ 5stars
If u need a slender socket for some O2 sensors this is it
customer review - by , July 7, 2023
5/ 5stars
This worked for the first O2 sensor on my 2018 Kia Optima 2.4L GDI.
customer review - by , November 11, 2022
5/ 5stars
This was helpful AF on removing and installing the upstream O2 Sensor
customer review - by , July 7, 2022
5/ 5stars
Used this tool on a 2005 highlander with a 4 cylinder engine. The stock o2 sensor has a shield and the tool fit perfectly. For best results spray with penetrating oil.
customer review - by , June 6, 2022
5/ 5stars
This socket worked great to remove the upstream air/fuel sensor on my 2009 Toyota Matrix 1.8L. It fit perfectly around the sensor with shield/collar around the hex nut. I used it in combination with a U-joint swivel, long extension, penetrating oil, and impact gun to loosen it working from top of the motor.
customer review - by , June 6, 2022
5/ 5stars
I'm finding out that I've got one of those pain In the ass vehicles that always require a special tool tool repair a part. 92 d250 5.9 v8
customer review - by , March 3, 2022
5/ 5stars
I have a 2017 Santa Fe Sport and the upstream sensor (Bank 1 Sensor 1) needed to be replaced. This fits to my knowledge 2013-2018 sensor with the weird upside-down dome around it like some of the others posted. Sensor I have is NTK 27027.
customer review - by , March 3, 2022
5/ 5stars
Had a stupid ring around o2 sensor and needed this. My first try didn't work, but 2nd popped it loose easy. I think the 1st try was my fault.Always use this o2 socket. No point in pulling out a 1lb bulky socket when this does the trick.

Cta CM2064 Thin-Wall Oxygen Sensor Socket, Price/EA

stars Rating 5 | 29 reviews
Brand CTA
Shop more from EAT

UPC: 053001020645
SKU: EAT-CM2064
Price: $14.27
Quantity:
Only 2 left In Stock
*  Click "Add to Cart" to calculate shipping and delivery time.
Share & Earn 10% Cash Back Best Price in Bulk

Product Description

Price is for EA.

Manufacturer Part Number: CM2064

  • Combination 1/2-Inch Square Drive and 1-Inch Hex Drive


  • Cta manufacturing 2064 thin wall oxygen sensor socket removes and installs 22mm oxygen sensors that cannot be accessed with standard sockets. 1/2-inch square drive and 1-inch external hex drive. Oal - 3.5-inch / 90mm.

    warning tips WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.p65warnings.ca.gov.

    Return Policy

    All EAT- items are returnable, except for Open Box Scan Tools. scan tools/electronics, air tool are non-returnable
    Need more information?
    Our staff are available to answer any questions you may have about this item


    Customer Reviews
    5 stars
    26
    4 stars
    3
    3 stars
    0
    2 stars
    0
    1 stars
    0
    By Matt
    Date: May 01, 2024
    Great for reaching the top banks of o2 sensors in Korean cars. Most sockets are to wide to fit in the narrow diameter for my 2011 Optima or 2015 Santa Fe. The thin sidewalls work great for the job.
    Rating: 5 stars [5 of 5 Stars!]
    By Newgigg
    Date: April 05, 2024
    My 2006 Highlander L4 2.4 engine oxygen sensor has a metal collar around the hex nut. Regular socket wall is too thick and won't push through. This thin-wall socket perfectly fits the Denso P/N 234-9054 oxygen sensor. Strongly recommend!!
    Rating: 5 stars [5 of 5 Stars!]
    By Elton strametz
    Date: February 04, 2024
    If u need a slender socket for some O2 sensors this is it
    Rating: 5 stars [5 of 5 Stars!]
    By Samuel Spear
    Date: July 26, 2023
    This worked for the first O2 sensor on my 2018 Kia Optima 2.4L GDI.
    Rating: 5 stars [5 of 5 Stars!]
    By Strellita
    Date: November 06, 2022
    This was helpful AF on removing and installing the upstream O2 Sensor
    Rating: 5 stars [5 of 5 Stars!]
    By jojo
    Date: July 10, 2022
    Used this tool on a 2005 highlander with a 4 cylinder engine. The stock o2 sensor has a shield and the tool fit perfectly. For best results spray with penetrating oil.
    Rating: 5 stars [5 of 5 Stars!]
    Items 1 - 6 of 29 reviews
     1  2  3  4  5  [Next]