I did not read the description or its not in the listing that the product is off white. What I was using the product for it would not work but dried hard and was very sticky.

Doesnt adhere to most usual materials.Looks like it have too many additives among the epoxy itself.

Product performed very well. easy to use.

I have to remember to reorder more of PC-11. In 10 weeks, I've almost used it all up. I have repaired a variety of things with it.... plastic pump discharge port, plumbing, electrical. Great product.

I like this product and compare it to the similar one that is a 'bar' of putty which must be combined by hand, not with a stirring action as this requires. I would like to have been provided two popsicle sticks to get the component parts out of the container. The other product does not need measuring of two items, as this does.Once mixed it is more malleable (softer) yet not too thin as to drip when used in a vertical location (mine was a vertical water pipe.) It takes longer to cure than some other products, particularly at lower temperatures.Word of caution: Use a very stiff piece of cardboard to mix this on. It is very sticky and paper won't cut it.

All good except it's very viscous and proper mixing requires some effort. At the same time, since it's mixed in equal parts, as opposed to 5x1 for Marine Tex, it's much easier to get a proper mix. As to whether it's as versatile or provides equal performance to Marine Tex, only time will tell. So far it seems to be excellent.

Used this to repair a decaying drain pipe for a toilet. I took off one star because it still seeped through after the first layer. I purchased another and did a second layer and it's now solid and dry !!

Mixes and adheres good, working time just right.

First off, this is botb good and bad. I bought 4 lbs to repair a 19 foot boat. The first 2lbs cured very well and sanded easy. I was even able to clean the epoxy enough for gel coat to adhere... BUT, the last 2lbs didn't worm out as well. Temperature and humidity levels were average throughput every application. The last 2lbs did not cure well, the top dried solid but the bottom layers and remained the consistency of old dried Play-Doh. Needless to say the gel coat reacted with the epoxy and it didn't cure. I believe there is some formula issues from pound to pound. But non the less it does work if you get a good batch.

So far, stops leaks in concrete sink. Put on underside of sink where leaks were occurring. No leaks now. Hopefully, this continues.

Needed to repair a crack on my fiberglass shower right across from the shower spray. Previous adhesives promised but didn't deliver but this is great. The product has a slight bluish tint to it but can be sanded smooth and painted.

So far so goodTakes a couple days to fully cure but damn it cures hard as a rock

I used it on wood, had problem with legs in the coffee tables. Its fixed. Had problems with legs on the chairs in the kitchen. Kept coming apart. They are fitted in type, the legs go up in the seat. thus a hole for it to go up into.became loose. The 2 legs has a cross piece that fits inside both legs to stable it. these came out of the holes. I put some inside of the holes put the cross piece up in there took a rope and tighten it up to hold in place. Worked great and solid. Its tacky and will hold its place. Mixing takes some effort.Be sure to mix it well. Its a good product. Before it dries much, you can use alcohol on a rag and wipe clean pretty easy. This wont work once it dries fully. Enjoy your fixed projects yall !!!

Not sure if this product would do the job as described. It says it would cure under water, I don't see that posible unless you use a lot of gardener, more than equal parts.Why, well I applied it yesterday using equal parts, at about 11am, it's now past 10am the next day, it was about 60 f, sunny. Today 54f, sunny, no rain, and it's still sticky and gummy.I think they should provide a bit more gardener, like an once more. Equal parts is not doing it. I've other like in weld and other, they stay gummy for a period of time longer than specified but harden after several hours. This one has been almost 23 hours and is still to sticky, gummy and uncured. Frustrating. I have no idea, how this will cure under water, unless you use a larger amount of hardener. Equal amounts ain't doing it.

The epoxy (Part A) is off-white. The hardener (Part B) is black. The result is a very dark gray, not off-white as claimed. I am now stuck with $40 of epoxy I can't use for its intended use (swimming pool tiles) because apparently it cannot be returned. I am quite angry.Deceptive advertising at its worst. If you are considering this product, go elsewhere.