This is really pretty, bought it for our 20th anniversary, unfortunately the cake didn't fit. Have to put a plate under the 8 cake and so it covers the pretty design. And very hard to find a dome cover to fit. I recommend a larger cake stand.

Very happy with this set. It matches our dinnerware set.

At Easter, we poured gravy onto the pork roast!It was perfect Thank You <

These are pretty but too large thought they would be smaller when ordering. They work well though and therefore I will be keeping them.

Beautiful

Great server for the price range but the assembly instructions weren’t great. In case you need help, here’s how I assembled it:- take the small screw and put a metal washer then a plastic washer on the screw- put the larger plate over the screw/washers and put another plastic washer over the part of the screw that’s sticking out (the plate should have a plastic washer on either side)- gently screw the rod onto the screw by hand- outa metal washer over the end of the rod, put another plastic washer on top of the metal one, place the small plate over it, and put another plastic washer on the other side of the plate (the small plate should again have a plastic washer on either side)- put the metal handle over the rod sticking out of the small plate and gently tighten by hand- the server will most likely be wobbly at this point so you’ll need to tighten it a bit more using a screw driver- grab a towel and lay the server sideways over the towel so you don’t scratch the edges- using the screw driver, tighten the screw from the bottom of the server while holding the top handle and middle rod in place (do this with someone else so one person can hold the pieces in place while the other person tighten the screw) - the server should be sturdy now- FYI, I had one leftover plastic washer that I didn’t end up using