It was expensive in my opinion for what it is used for. It did the job though.

Great quality,exactly what I needed.

This largely fulfilled my need. Installation was fairly straightforward, and it seems quite sturdy. Encountered a small problem in that the screw holes on the included device cover plate don't line up with the holes for mounting the plate on the bracket. I would likely have chosen a different plate anyways, in which case this wouldn't be an issue, but it would be nice for that to have been a choice, rather than to be forced into it. At any rate, it seems a little sloppy on the part of the manufacturer.

These are built so good. I took the time to back both sides of the box so that ii get perfect depth inside drywall all around unit. The 3 gangs are adjustable and I turned mine into a 1 gang for 120v and 2 for hdmi and Ethernet I had some left over central shop back and used that as a sleeve between boxes to hide cables behind wall. These things are expensive but work so well. Made robust. The top 2 pics in photo are the units. BottomPlug will be getting removed

Overall works great. Caution: if you have to install and take it back out for any reason, you can loosen it too much whereas the black plastic retainer tabs can come off the screw. You then have to try and reclaim these from inside the wall to hold it firmly against the drywall when reinstalling.

It is great but not perfect. I used this in a very deep wall and it worked great. Wouldn't even think of this in a 434; stud wall in a different room. I liked having a surge suppression outlet for the TV and the ability for a second switched outlet for LED lights. You have to beat the hll out of the knockout and low voltage 1 gang knockouts. I was afraid I'd break it but it held up.

I used this box with a recent home theater upgrade I performed. With the Mantle Mount I purchased to hold the TV, I was able to install this box sideways within the mounting bracket, with a very minor filing of the edges of the face frame on two sides. This way, it should be virtually invisible in use. My only small complaint about the box is that it came with the plastic 34;Romex34; clamp already installed in one of the two electrical box knockouts. I needed to move it to the other side for my installation, and found that there was no knock out plug supplied in the kit. My previous purchases of larger Arlington boxes have come with the plastic plug needed to keep the installation code compliant. I was able to substitute a metal knockout plug, but I feel it should have been supplied or the clamp should not have been pre-installed, such that I needed to plug a hole in the first place. To be fair, it could be that the plug was just left out of the package by mistake. Regardless, I would definitely buy this box again, given how perfectly it suited my installation.

Went in easy and creates a nice finished look (even though its hidden behind the TV). The only issue I have is the cover plate is a non-standard size. I accidentally snapped it in half and thought I could run to a big box and replace it with a standard 2-Gang cover plate, which doesn't fit. I don't understand why the manufacturer chose a custom size for the cover plate. Makes a simple repair a little more involved.

The box is well constructed, inexpensive, and simple to install. I used it to replace a standard 2-gang box left by the previous owners with coax and electricity both running through it, which is not in compliance with National Electric Code. This box meets the requirement to have communications and electrical cables separated by a divider in the same box.

This is a great way to connect a TV to its other components when mounting the TV on a wall. The TV can be removed without making all the disconnections.

Good to hide those wires. The recess is too deep leaving little room in the back for hdmi adapter Keystone

This was BIG. But then again that's why I bought it. I have an outlet installed, then the high/low voltage insert next to that. The reason I went with this is so I could actually place the media device in the wall behind the tv. I used a very very low profile wall mount for the slim TV. Not being a fan of wires I wanted to be able to put the AppleTV in the wall as well. It fits perfectly in the space where the two shallow knockouts are. Now nothing is visible at all. Just a TV on the wall.

Just what I needed

It works

Not exactly what I was looking for but is working for my application

Just what I needed!

This box is pretty nice. I'm using it for our projector location. It's not quite as heavy duty as I've grown to be used to with Arlington products but it is sturdy enough to get the job done. I'd recommend it overall.

Got this for a very compact space, but it was too wide to fit between a rock and a hard place. Ill keep it for a future project in another house.