Didn't work with the multimeter I ordered

no quedan en mi testiador numer 3

Overall the probes seem just 34;OK34;. The needle tips were not as thin as expected. I calipered the needle as 0.038-0.039 inches diameter, just under 1mm. Falls between standard wire gauges 19 20. I have some worries the weather seal on a typical automotive connector will get compromised if I stick the needle into the connector 's backside. Last thing I needis a non-healing pinhole allowing moisture to weep into the connector body. The somewhat flexible body might be useful one day ... but not sure if or when. The probes accept a common, standard, male banana plug for connecting to a DMM or other instrument, so that's a 34;plus34;.

These are good long reach/needle point multimeter leads. They are a tad flimsy and I think there may be some sort of coating on the needle tips. I can get readings from the very end but touching the two needles together in the middle registers an open circuit. I'm hoping the coating will rub off at some point.

Pretty good, not as flexible as claimed, but still good for the price.

great and what i expected