Used the std bulb changer to remove the std lights from 6 fixtures. Changed to the flood adapter, and installed 6 new LED Flood lights. Just a note, on the flood adapter, you will likely need to adjust the rubber 'grabber' tubes after each flood light you install. Not a problem, just grab them on the 'sides' and not the top and bottom. When you pull the adapter off the flood light, the grabbers drag as the pressure is there. Worked great. I have a very high ceiling shop (RV originally), and they are way up there. No ladder, stood on the floor. Love all the different adapters.

I've it used it one. And it work good. However, it randomly slip away at the top of the pole bar. I still like it and recommend those to give it a try.

Muy facil de usar, buena calidad

This is made great but they didn't work on my light bulbs. I am still looking for something like this that will fit my bulbs.

I successfully used the largest cage to change BR30 light bulbs and tried to use it for BR40, but wasn't enough room. If there is plenty of space, this works great. There were the two highest ones I needed to change that were in a tighter-fitting housing and no luck getting it to go around the bulb.So I tried the suction cup, and I couldn't get it to work at all. Tried on a light bulb that was in my hand just to see if I could make it work, but I could get a little suction, but broke the suction just barely pulling on it.Haven't tried any of the other parts. I will probably keep it just in case a bulb ever gets broken off, those other things would probably be handy.

Using the change was a lot safer than climbing up by 20 foot ladder

The suction cup works well. I used it to change 12 bulbs in 20 feet height. I tried one with spring, it's too tied. I'm afraid I pulling down the light housing.

The screw on the yellow plastic base cracks the plastic and won't tighten. A HOSE CLAMP OVER THE BASE TIGHTENED UP WORKS GREAT AND SOLVES THE PROBLEM. I have tried many, many kinds of bulb changers for my 16 foot ceiling floods and this is the best. After the hose clamp is added!! Thank you resourceful husband.

This is a great looking product but did not work for our candelabra bulbs. The fit was not right and it snapped the neck right off. Now we have to get a ladder after all to remove the filament.

I can't seem to use this. I think it's my set up more than this product. I have a VERY high chandelier that is not fixed. Because it swings around so much I can't get any leverage to push up on the socket and get hold on the metal base (I had a bulb break off and I'm trying the socket removal tool). I wish I could use it but I can't. I have a bulb now to change in the center that is a flat flood style bulb so we'll see how the caged attachment works. You do get a lot of different tools with one kit. I already had the extension pole so I used this with my existing one.I guess I'll hire a handy man with scaffolding...

Had an outside floodlight that needed replacing but the ladder would not work with all the shrubbery in the way. Both this kit and figured it was worth a try. Screwed the floodlight adapter onto my 20 foot pole and I had that build out and replaced in under 10 minutes!

If you have a pole to use made job very easy to change garage bulb was worth the money!I am sure Il use the other bulb changing parts later If I do not forget where I put it LOL